No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Switching a Fat AP to a Fit AP or Cloud AP

Switching a Fat AP to a Fit AP or Cloud AP

Context

The administrator must connect a PC to the console port on the AP to log in to the AP, connect GE0/0/0 on the AP to a TFTP or SFTP server, and switch the Fat AP to a Fit AP or cloud AP, as shown in Figure 3-36.

Figure 3-36  AP networking diagram

Pre-configuration Tasks

Before switching a Fat AP to a Fit AP or cloud AP, complete the following task:

  • Upload the system software file of the Fit AP or cloud AP to the TFTP server, FTP server, SFTP server, or AP backup area.

NOTE:

Only the AP2050DN, AP2050DN-E, AP4050DN-E, AP4050DN-HD, AP7050DN-E, AP7050DE, AP4030TN, AP6150DN, AP6050DN, AD9430DN-12, AD9430DN-24, AP8050DN, AP8050DN-S, AP8150DN, AP4050DN, AP4050DN-S, AP4051DN, AP4151DN, AP1050DN-S, AD9431DN-24X, AP8130DN, and AP8030DN support upload of the system software file to their backup area.

The AP4030TN does not support cloud working mode.

Procedure

  1. Run:

    system-view

    The system view is displayed.

    Only AP5030DN, AP5130DN, AP4030DN, AP4130DN, AP9131DN, AP9132DN, AP3010DN-V2 need to run 2.

  2. Run:

    ap-mode-switch check

    The file system on the Fat AP is checked whether a Fat AP allows for switching to a Fit AP. Skip this step if a Fat AP is switched to a cloud AP.

    If not, do not perform the following steps. Otherwise, the AP file system may be damaged and the AP cannot properly start.

  3. Run the appropriate command to switch a Fat AP to a Fit AP or cloud AP, depending on the file server and AP model used on the network:

    Commands for the AP2050DN, AP2050DN-E, AP4050DN-HD, AP4050DN-E, AP7050DN-E, AP7050DE, AD9430DN-24, AD9430DN-12, AP4030TN, AP6150DN, AP6050DN, AP8050DN, AP8050DN-S, AP8150DN, AP4050DN, AP4050DN-S, AP4051DN, AP4151DN, AP1050DN-S, AD9431DN-24X, AP8130DN and AP8030DN:

    • Run:
      ap-mode-switch { fit  | cloud } tftp filename server-ip-address

      The AP is connected to a TFTP server to switch the system software file of a Fat AP to that of a Fit AP or cloud AP.

    • Run:
      ap-mode-switch { fit  | cloud } ftp filename server-ip-address user-name password [ port ]

      The AP is connected to an FTP server to switch the system software file of a Fat AP to that of a Fit AP or cloud AP.

    • Run:
      ap-mode-switch { fit  | cloud } sftp filename server-ip-address user-name password [ port ]

      The AP is connected to an SFTP server to switch the system software file of a Fat AP to that of a Fit AP or cloud AP.

    • Run:
      ap-mode-switch { fit  | cloud }

      The AP obtains the system software file from the AP backup area to switch AP running mode.

    Commands for other AP models (these AP models cannot switch their running mode from Fat AP to cloud AP):

    • Run:
      ap-mode-switch tftp filename server-ip-address

      The AP is connected to a TFTP server to download the system software file to switch a Fat AP to a Fit AP.

    • Run:
      ap-mode-switch ftp filename server-ip-address user-name password [ port ]

      The AP is connected to an FTP server to download the system software file to switch a Fat AP to a Fit AP.

    • Run:
      ap-mode-switch sftp filename server-ip-address user-name password [ port ]

      The AP is connected to an SFTP server to download the system software file to switch a Fat AP to a Fit AP.

    After the command is run, the system asks you to restart the device. After you restart the device, the switching is complete.

    After the restart, factory settings of the AP that is switched to are restored.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 129014

Downloads: 311

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next