No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Troubleshooting DNS

Troubleshooting DNS

Dynamic Domain Name Resolution Cannot Be Implemented on a DNS Client

Fault Description

The AP functions as a DNS client that is configured with dynamic domain name resolution but cannot resolve domain names to IP addresses correctly.


  1. Run the display dns dynamic-host command to check whether the specified domain name exists in the dynamic domain name cache.

    • If not, check whether the DNS client communicates with the DNS server properly, the DNS server runs properly, and dynamic domain name resolution is enabled.
    • If so, but the IP address is incorrect, go to step 2.

  2. Run the display dns server command to verify that the IP address of the DNS server is correct on the DNS client.

    If the DNS server IP address is incorrect, run the undo dns server ip-address command to delete the configured DNS server IP address, and run the dns server ip-address command to reconfigure a correct IP address for the DNS server.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116192

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next