No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring RU Online Parameters (AP View)

Configuring RU Online Parameters (AP View)

You can configure RU online parameters on a central AP, including the RU name, group to which an RU belongs, mode of obtaining an IP address, static IP address, gateway address, and central AP IP address list. You do not need to log in to RUs one by one to configure these parameters.

You can configure AP online parameters in either of the following views:
  • AP view
  • AP provisioning view

You are advised to configure RU online parameters for a large number of RUs in the AP provisioning view or for a single RU in the AP view. In this case, configure RU online parameters in the AP view.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 129803

Downloads: 312

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next