No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Configuration

Default Configuration

This section provides the default IP performance configuration.

Table 7-57 describes the default configuration of IP performance.

Table 7-57  Default IP performance configuration

Parameter

Default Configuration

Source IP address verification

Disabled

IP packet fragmentation on outbound interface

Disabled

Fast ICMP reply function

Enabled

Discarding ICMP packets whose TTL values are 1

Disabled

Discarding ICMP packets that carry options

Disabled

Discarding ICMP destination unreachable packets

Disabled

Sending ICMP port unreachable packets

Enabled

TCP SYN-Wait timer

75s

TCP FIN-Wait timer

675s

TCP window size

8k bytes

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116807

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next