No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Limitations for NAT

Configuration Limitations for NAT

When configuring NAT, pay attention to the following points:

If the configurations of nat alg, nat server, and nat outbound are changed, the packets are not forwarded based on new configurations. You can run the reset nat session command to make the new configurations take effect. This command can be used to delete all entries or the entries of traffic passing a specified interface from the NAT mapping table.

Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116399

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next