No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining STP/RSTP

Maintaining STP/RSTP

STP/RSTP maintenance includes resetting STP/RSTP statistics.

Clearing STP/RSTP Statistics


STP/RSTP statistics cannot be restored after being cleared.


  • Run the reset stp [ interface interface-type interface-number ] statistics command to clear spanning-tree statistics.
  • Run the reset stp error packet statistics to clears the statistics of error STP packets.

Monitoring the Statistics on STP/RSTP Topology Changes

The statistics about STP/RSTP topology changes can be viewed. If the statistics increase, network flapping occurs.


  • Run the display stp topology-change command to view the statistics about STP/RSTP topology changes.
  • Run the display stp [ interface interface-type interface-number ] [ brief ] command to view the spanning-tree status and statistics.
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 189313

Downloads: 346

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next