No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Automatic Per Packet Power Adjustment

Configuring Automatic Per Packet Power Adjustment

Context

You can configure automatic per packet power adjustment on WLANs to reduce AP power consumption and interference to surrounding devices. This configuration applies to WLANs with good signal coverage.

Pre-configuration Tasks

Before configuring automatic per packet power adjustment, perform the task of WLAN Service Configuration Guide (Common AP).

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    wlan

    The WLAN view is displayed.

  3. Run:

    radio-2g-profile name profile-name or radio-5g-profile name profile-name

    The 2G or 5G radio profile view is displayed.

  4. Run:

    power auto-adjust enable

    Automatic per packet power adjustment is enabled for APs.

    By default, automatic per packet power adjustment is disabled for an AP.

  5. Run:

    quit

    Return to the WLAN view.

Verifying the Configuration

  • Run the display radio-2g-profile name profile-name command to check the automatic per packet power adjustment configuration of an AP in a 2G radio profile.
  • Run the display radio-5g-profile name profile-name command to check the automatic per packet power adjustment configuration of an AP in a 5G radio profile.
Translation
Download
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116943

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next