No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining VRRP

Maintaining VRRP

This section describes how to maintain VRRP, including monitoring the VRRP running status and clearing VRRP packet statistics.

Monitoring the VRRP Running Status


During routine maintenance, you can run the following command to view VRRP packet statistics and monitor the VRRP running status.

  • Run the display vrrp [ interface interface-type interface-number ] [ virtual-router-id ] statistics command in any view to view statistics about sent and received packets of a VRRP group.

Clearing VRRP Packet Statistics


Before recollecting statistics about VRRP packets in a period of time, clear existing statistics.

The cleared statistics cannot be restored. Exercise caution when you run the reset command.

  • Run the reset vrrp [ interface interface-type interface-number ] [ vrid virtual-router-id ] statistics command in the user view to clear statistics about a VRRP group.
Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116723

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next