No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Air Interface Environment Information About AP Radios

Checking Air Interface Environment Information About AP Radios


You can check air interface environment information about an AP radio to know the situation of the radio's air interface quality.

After you run the display ap radio-environment [ radio radio-id ] command is executed, radio scanning of the AP is automatically enabled, and the AP starts to scan the air interface environment of the radio. When you run this command for the first time, no scanning result is displayed. To view the air interface environment scanning result, run this command again.


  • Run:

    display ap radio-environment [ radio radio-id ]

    Air interface environment information about the AP radio is displayed.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 116264

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next