No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R008C00 CLI-based Configuration Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding a Trackside AP

Adding a Trackside AP


  1. Run:


    The system view is displayed.

  2. Run:


    The WLAN view is displayed.

  3. Run:

    ap auth-mode { mac-auth | sn-auth }

    The AP authentication mode is set to MAC or SN authentication.

    The default AP authentication mode is MAC address authentication.

  4. Run:

    ap-id ap-id [ [ type-id type-id | ap-type type-id ] { ap-mac ap-mac [ ap-sn ap-sn ] } ] or ap-mac ap-mac [ [ type-id type-id | ap-type ap-type ] [ ap-id ap-id ] [ ap-sn ap-sn ] ]

    The AP is imported offline and the AP view is displayed.

  5. Run:

    ap-name ap-name

    The AP name is configured.

    By default, no AP name is configured for an AP.

  6. Run:

    ap-group group-name

    The AP is added to an AP group.

    By default, no AP group is configured.

Updated: 2019-01-11

Document ID: EDOC1000176006

Views: 118303

Downloads: 309

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next