No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Tools 2.0 uREST User Guide 16

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Controller Attributes

Setting Controller Attributes

Function

Set controller attributes.

Only out-of-band RAID controller cards are supported.

Format

./urest -H HOST -p PORT -U USERNAME -P PASSWORD setraid -I CONTROLLERID -CS {True,False} -SCBS {True,False} -JS {True,False}

Parameters

Parameter

Description

Value

HOST

iBMC IP address or domain name. It is a mandatory parameter. If an IPv6 address is used, the IPv6 address must be included in square brackets, such as [1001::1001].

-

PORT

Port number. The default value is 443. It is an optional parameter.

Enter the port number if the default value 443 is not used.

USERNAME

iBMC user name. It is a mandatory parameter.

-

PASSWORD

Password of the iBMC user. It is a mandatory parameter.

-

CONTROLLERID

Controller ID. It is a mandatory parameter.

-

-CS {True,False}

Copyback function enabling status. It is an optional parameter.

  • True: Enable the copyback function.
  • False: Disable the copyback function.

-SCBS {True,False}

SMART error copyback function enabling status. It is an optional parameter.

NOTE:

To enable the SMART error copyback function, the copyback function must be enabled.

  • True: Enable the SMART error copyback function.
  • False: Disable the SMART error copyback function.

-JS {True,False}

Driver passthrough function enabling status. It is an optional parameter.

  • True: Enable the driver passthrough function.
  • False: Disable the driver passthrough function.

Usage Guidelines

None

Example

Obtain help information.

[root@localhost bin]# ./urest -H 172.100.10.45 -U root -P ****** setraid -h 
usage: urest setraid [-h] -I CONTROLLERID [-CS {True,False}]
                     [-SCBS {True,False}] [-JS {True,False}]
 
optional arguments:
  -h, --help          show this help message and exit
  -I CONTROLLERID     RAID controlelr ID
  -CS {True,False}    whether copyback is enabled for specified RAID
                      controller
  -SCBS {True,False}  whether SMART error copyback is enabled for the
                      specified raid controller
  -JS {True,False}    whether JBOD is enabled

Set controller attributes.

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** setraid -I 0 -CS True 
Success: successfully completed request
Translation
Download
Updated: 2020-02-13

Document ID: EDOC1000176182

Views: 119733

Downloads: 586

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next