No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
FusionServer Tools 2.0 uREST User Guide 16
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Error Message "Failure: resource was not found." Is Displayed When a User Attempts to Obtain the Smart Provisioning Information or Upgrade Smart Provisioning

Error Message "Failure: resource was not found." Is Displayed When a User Attempts to Obtain the Smart Provisioning Information or Upgrade Smart Provisioning

Symptom

When uRest is used to obtain the Smart Provisioning information of the V5 server or TaiShan 200 server or to upgrade Smart Provisioning, "Failure: resource was not found." is displayed when the network is normal.

Cause Analysis

The server does not support Smart Provisioning functions or Smart Provisioning is not installed.

Solution

  • Check the server model. Only V5 servers and TaiShan 200 servers support Smart Provisioning.
  • Check whether Smart Provisioning is installed on the server.
Translation
Download
Updated: 2020-02-13

Document ID: EDOC1000176182

Views: 130257

Downloads: 601

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next