No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Tools 2.0 uREST User Guide 16

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying Smart Provisioning Information

Querying Smart Provisioning Information

Function

Query Smart Provisioning information.

Format

./urest -H HOST -p PORT -U USERNAME -P PASSWORD getspinfo

Parameters

Parameter

Description

Value

HOST

iBMC IP address or domain name. It is a mandatory parameter. If an IPv6 address is used, the IPv6 address must be included in square brackets, such as [1001::1001].

-

PORT

Port number. The default value is 443. It is an optional parameter.

Enter the port number if the default value 443 is not used.

USERNAME

iBMC user name. It is a mandatory parameter.

-

PASSWORD

Password of the iBMC user. It is a mandatory parameter.

-

Usage Guidelines

  • Only FusionServer V5 servers and TaiShan 200 servers are supported. Atlas servers are not supported.
  • The BIOS version must be 0.39 or later.
  • Smart Provisioning must be installed on the server.

Example

Query Smart Provisioning information.

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** getspinfo 
SysRestartDelaySeconds        : 30 
SPStartEnabled                : False 

[Version] 
OSVersion                     : 1.01 
APPVersion                    : 1.01 
DataVersion                   : 1.01

If information cannot be obtained and an error message similar to Failure: resource was not found is displayed, handle the problem by seeing Error Message "Failure: resource was not found." Is Displayed When a User Attempts to Obtain the Smart Provisioning Information or Upgrade Smart Provisioning.

System Response

Table 3-18 Output description

Parameter

Description

SysRestartDelaySeconds

System restart latency, of which the unit is second.

SPStartEnabled

Smart Provisioning service enabling or disabling.

  • True: enabled
  • False: disabled

OSVersion

Smart Provisioning system version.

APPVersion

Smart Provisioning application version.

DataVersion

Smart Provisioning data version.

Translation
Download
Updated: 2020-02-13

Document ID: EDOC1000176182

Views: 120146

Downloads: 587

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next