No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
FusionServer Tools 2.0 uREST User Guide 16
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying Power Capping

Querying Power Capping

Function

Query power capping.

Format

./urest -H HOST -p PORT -U USERNAME -P PASSWORD getpowerlimit

Parameters

Parameter

Description

Value

HOST

iBMC IP address or domain name. It is a mandatory parameter. If an IPv6 address is used, the IPv6 address must be included in square brackets, such as [1001::1001].

-

PORT

Port number. The default value is 443. It is an optional parameter.

Enter the port number if the default value 443 is not used.

USERNAME

iBMC user name. It is a mandatory parameter.

-

PASSWORD

Password of the iBMC user. It is a mandatory parameter.

-

Usage Guidelines

None

Example

Query power capping.

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** getpowerlimit 
LimitInWatts  : 750 
LimitException: NoAction

System Response

Table 3-33 Output description

Parameter

Description

LimitInWatts

Power capping value.

LimitException

Operation after the power capping value is reached.

Translation
Download
Updated: 2020-02-13

Document ID: EDOC1000176182

Views: 132038

Downloads: 601

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next