No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
FusionServer Tools 2.0 uREST User Guide 16
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Performing Operations on a Virtual Smart Provisioning USB Flash Drive

Performing Operations on a Virtual Smart Provisioning USB Flash Drive

Function

Perform operations on a virtual Smart Provisioning USB flash drive.

Format

./urest -H HOST -p PORT -U USERNAME -P PASSWORD --timeout=TIMEOUT connectvusb -T {Disconnect,Connect} -CT {Formal,Temporary

Parameters

Parameter

Description

Value

HOST

iBMC IP address or domain name. It is a mandatory parameter. If an IPv6 address is used, the IPv6 address must be included in square brackets, such as [1001::1001].

-

PORT

Port number. The default value is 443. It is an optional parameter.

Enter the port number if the default value 443 is not used.

USERNAME

iBMC user name. It is a mandatory parameter.

-

PASSWORD

Password of the iBMC user. It is a mandatory parameter.

-

TIMEOUT

Timeout interval for accessing the iBMC Redfish interface. It is an optional parameter. The default value is 120 seconds.

The value ranges from 10 to 1000, and the unit is seconds.

-T {Disconnect,Connect}

Virtual USB flash drive control operation. It is a mandatory parameter.

  • Connect: Connect a virtual USB flash drive.
  • Disconnect: Disconnect a virtual USB flash drive.

-CT {Formal,Temporary}

Connection type. If the virtual USB flash drive control operation is Connect, it is a mandatory parameter. If the USB flash drive operation is Disconnect, this parameter is not supported.

  • Formal: Formal connection
  • Temporary: Temporary connection, which is valid when the OS is powered off.

Usage Guidelines

This function applies only to FusionServer V5 servers and TaiShan V2 servers.

Example

Obtain help information.

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** connectvusb -h 
usage: urest connectvusb [-h] -T {Disconnect,Connect} [-CT {Formal,Temporary}]
 
optional arguments:
  -h, --help            show this help message and exit
  -T {Disconnect,Connect}
                        operation type
  -CT {Formal,Temporary}
                        operation Connect type

Disconnect a virtual USB flash drive.

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** connectvusb –T Disconnect 
Success: successfully completed request
Translation
Download
Updated: 2020-02-13

Document ID: EDOC1000176182

Views: 133234

Downloads: 602

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next