No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Tools 2.0 uREST User Guide 16

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying Log Information

Querying Log Information

Function

Query log information.

Format

./urest -H HOST -p PORT -U USERNAME -P PASSWORD getsel -PA {Enabled,Disabled}

Parameters

Parameter

Description

Value

HOST

iBMC IP address or domain name. It is a mandatory parameter. If an IPv6 address is used, the IPv6 address must be included in square brackets, such as [1001::1001].

-

PORT

Port number. The default value is 443. It is an optional parameter.

Enter the port number if the default value 443 is not used.

USERNAME

iBMC user name. It is a mandatory parameter.

-

PASSWORD

Password of the iBMC user. It is a mandatory parameter.

-

{Enabled,Disabled}

Whether log information is displayed on different pages. It is an optional parameter. If this parameter is not set, information is displayed on different pages by default.

  • Enabled: Log information is displayed on different pages. One record is displayed first. Then you can press any key to display the remaining information or press q to exit.
  • Disabled: Log information is displayed on one page.

Usage Guidelines

None

Example

Obtain help information.

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** getsel -h
usage: urest getsel [-h] [-PA {Enabled,Disabled}]
 
optional arguments:
  -h, --help            show this help message and exit
  -PA {Enabled,Disabled}
                        get SEL record information paging display

Query log information.

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** getsel 
-------------------------------------------------- 
Id            : 1 
Severity      : OK 
EventTimestamp: 2017-08-11T15:30:36+00:00 
EntryType     : Event 
EventType     : Alert 
Message       : iBMC event records are cleared. 
MessageId     : iBMCEvents.2.0.BmcEventSelClearedInfo 
EventId       : 0x1A00000F 
--------------------------------------------------

System Response

Table 3-20 Output description

Parameter

Description

Id

Log resource ID.

Severity

Security level.

EventTimestamp

Time when the event occurs.

EntryType

Log type.

EventType

Event type.

Message

Log description information.

MessageId

Message ID.

EventId

Event code.

Translation
Download
Updated: 2020-02-13

Document ID: EDOC1000176182

Views: 121183

Downloads: 588

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next