No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Tools 2.0 uREST User Guide 16

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting System Performance

Setting System Performance

Function

Set system performance.

Format

./urest -H HOST -p PORT -U USERNAME -P PASSWORD setsysperf -C CPU -M MEM -D HDD

Parameters

Parameter

Description

Value

HOST

iBMC IP address or domain name. It is a mandatory parameter. If an IPv6 address is used, the IPv6 address must be included in square brackets, such as [1001::1001].

-

PORT

Port number. The default value is 443. It is an optional parameter.

Enter the port number if the default value 443 is not used.

USERNAME

iBMC user name. It is a mandatory parameter.

-

PASSWORD

Password of the iBMC user. It is a mandatory parameter.

-

CPU

CPU usage threshold. It is an optional parameter.

-

MEM

Memory usage threshold. It is an optional parameter.

-

HDD

Disk usage threshold. It is an optional parameter.

-

Usage Guidelines

None

Example

Obtain help information.

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** setsysperf -h 
usage: urest setsysperf [-h] [-C CPU] [-M MEM] [-D HDD]
 
optional arguments:
  -h, --help  show this help message and exit
  -C CPU      CPU threshold percent
  -M MEM      memory threshold percent
  -D HDD      hard disk threshold percent

Set system performance.

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** setsysperf -C 100 -M 100 -D 100 
Success: successfully completed request

Query system performance.

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** getsysperf 
CPUUsagePercent           :0 
MemoryUsagePercent        :0 

[PartitionLists] 
CPUthresholdPercent       :100 
MemorythresholdPercent    :100 
HardDiskthresholdPercent  :100
Translation
Download
Updated: 2020-02-13

Document ID: EDOC1000176182

Views: 122101

Downloads: 591

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next