No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

FusionServer Tools 2.0 uREST User Guide 16
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Erasing Hard Drives Using the Smart Provisioning Service

Erasing Hard Drives Using the Smart Provisioning Service

  1. Deliver the task. For details, see Creating the Hard Drive Erase Configuration for the Smart Provisioning Service.
  2. Enable the system to boot from Smart Provisioning. For details, see Modifying the Smart Provisioning Service Resource Attributes.
  3. Forcibly restart the OS by referring to Powering On or Off an OS

    After the server is restarted, the server automatically enters Smart Provisioning to perform the hard drive erase task.

  4. Query the results by referring to Querying the Configuration Result Resources of the Smart Provisioning Service.
Updated: 2020-02-13

Document ID: EDOC1000176182

Views: 131738

Downloads: 601

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next