No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
FusionServer Tools 2.0 uREST User Guide 16
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BIOS Configuration Items

BIOS Configuration Items

Table A-1 BIOS parameters

Field

Type

Description

Value

Supported BIOS Versions

QuickBoot

Character string

Setting of the quick boot mode. If quick boot is enabled, the POST will be limited to a brief testing phase to shorten the boot time.

  • Enabled (default)
  • Disabled

All versions

QuietBoot

Character string

Setting of the quiet boot mode. If quiet boot is enabled, the BIOS logo will be displayed instead of the BIOS POST messages.

  • Enabled
  • Disabled (default)

All versions

PXEBootToLan

Character string

Setting of the PXE function in legacy mode.

  • Enabled (default)
  • Disabled

Versions earlier than 0.20

PXEBootToLanLegacy

Character string

Setting of the PXE function in legacy mode.

  • Enabled (default)
  • Disabled

0.20 and later

PXEBootToLanUEFI

Character string

Setting of the PXE function in UEFI mode.

  • Enabled (default)
  • Disabled

0.20 and later

PXEOnly

Character string

Setting of the PXE boot, which can be enabled or disabled.

  • Enabled
  • Disabled (default)

Versions earlier than 6.52

BootTypeOrder0

Character string

First boot device.

  • HardDiskDrive(default): boot from the drive.
  • DVDROMDrive: boot from the DVD drive.
  • PXE: boot from PXE.
  • Others: boot from other devices.

All versions

BootTypeOrder1

Character string

Second boot device.

  • HardDiskDrive: boot from the drive.
  • DVDROMDrive (default): boot from the DVD drive.
  • PXE: boot from PXE.
  • Others: boot from other devices.

All versions

BootTypeOrder2

Character string

Third boot device.

  • HardDiskDrive: boot from the drive.
  • DVDROMDrive: boot from the DVD drive.
  • PXE (default): boot from PXE.
  • Others: boot from other devices.

All versions

BootTypeOrder3

Character string

Fourth boot device.

  • HardDiskDrive: boot from the drive.
  • DVDROMDrive: boot from the DVD drive.
  • PXE: boot from PXE.
  • Others (default): boot from other devices.

All versions

CustomPowerPolicy

Character string

Power policy to be used.

  • Efficiency: reduces processor speed and power usage to maintain a lower maximum power usage for the system.
  • Performance: allows processors to run in the maximum power and performance state for optimal performance.
  • Custom (default): allows the user to customize the power policy.
  • LoadBalance: automatically adjusts processor speed and power usage based on processor utilization to reduce overall power consumption without compromising performance.

All versions

TurboMode

Character string

Setting of the processor Turbo mode.

  • Enabled (default)
  • Disabled

All versions

ProcessorHyperThreadingDisable

Character string

Hyper-threading setting for processors (This parameter is not for some processors). Enabling this function increases the number of logical processor cores and improves system performance.

  • Enabled (default)
  • Disabled

All versions

ProcessorEISTEnable

Character string

Setting of the Enhanced Intel SpeedStep Technology (EIST), which allows the system to automatically adjust the CPU voltage and core frequency to reduce power consumption and heat dissipation.

  • Enabled (default)
  • Disabled

All versions

PowerSaving

Character string

Setting of the energy saving feature.

  • Enabled
  • Disabled (default)

All versions

SystemCpuUsage

Numeric

CPU usage threshold.

  • 50 to 99 (default value: 95)

All versions

PStateDomain

Character string

Setting of the CPU P-state domain.

  • All (default): All logical processors in the CPU share a single frequency.
  • One: All cores in the CPU can run at their own independent frequency.

All versions

ProcessorAutonomousCstateEnable

Character string

Setting of the autonomous core C-state.

  • Enabled
  • Disabled (default)

Versions earlier than 2.8.5

ProcessorAutonomousCStateEnable

Character string

Setting of the autonomous core C-state.

  • Enabled
  • Disabled (default)

2.8.5 and later

ProcessorC1eEnable

Character string

Enhanced Halt State (C1E).

  • Enabled (default)
  • Disabled

All versions

C6Enable

Character string

Setting of the CPU C6 state.

  • Enabled
  • Auto (default)
  • Disabled

All versions

NumaEn

Character string

Setting of the NUMA function.

  • Enabled (default)
  • Disabled

All versions

PCIeSRIOVSupport

Character string

Setting of the SR-IOV feature for PCIe cards.

  • Enabled
  • Disabled (default)

All versions

PCIeARISupport

Character string

Setting of the ARI feature for PCIe cards.

  • Enabled
  • Disabled (default)

All versions

VTdSupport

Character string

Setting of the Intel VT for Directed I/O (VT-d) feature.

  • Enabled (default)
  • Disabled

All versions

InterruptRemap

Character string

Setting of the Interrupt Remapping feature.

  • Enabled (default)
  • Disabled

All versions

CoherencySupport

Character string

Support for non-synchronous consistency.

  • Enabled (default)
  • Disabled

All versions

ATS

Character string

Setting of the ATS function.

  • Enabled (default)
  • Disabled

All versions

PassThroughDMA

Character string

Setting of the pass-through DMA function.

  • Enabled (default)
  • Disabled

All versions

BMCWDTEnable

Character string

Setting of the watchdog in the POST process.

  • Enabled
  • Disabled (default)

All versions

BMCWDTAction

Character string

Action to be taken when the watchdog times out in the POST process.

  • NoAction: No action is taken.
  • HardReset (default): performs a cold restart.
  • PowerDown: powers off the system.
  • PowerCycle: performs a warm restart.

All versions

BMCWDTTimeout

Numeric

Watchdog timeout period (in minutes) in the POST process.

  • Value range: 18 to 25 (default value: 20)

All versions

OSWDTEnable

Character string

Setting of the watchdog for the OS.

  • Enabled
  • Disabled (default)

All versions

OSWDTAction

Character string

Action to be taken when the watchdog times out in the OS startup process.

  • NoAction: No action is taken.
  • HardReset (default): performs a cold restart.
  • PowerDown: powers off the system.
  • PowerCycle: performs a warm restart.

All versions

OSWDTTimeout

Numeric

Watchdog timeout period (in minutes) in the OS startup process.

  • Value range: 2 to 8 (default value: 5)

All versions

CREnable

Character string

Setting of the serial port redirection function.

  • Enabled (default)
  • Disabled

All versions

GlobalBaudRate

Character string

Rate of serial port redirection.

  • Rate115200 (default)
  • Rate57600
  • Rate38400
  • Rate19200
  • Rate9600
  • Rate4800
  • Rate2400
  • Rate1200

All versions

ProcessorFlexibleRatioOverrideEnable

Character string

Function for setting the CPU non-Turbo maximum frequency.

  • Enabled
  • Disabled (default)

All versions

ProcessorFlexibleRatio

Numeric

CPU non-Turbo maximum frequency.

  • Value range: 0 to 40 (default value: 0)

All versions

ProcessorHWPMEnable

Character string

Setting of the CPU HWP function.

  • NativeMode: native mode
  • OutOfBandMode: out-of-band mode
  • NativeModewithNoLegacySupport: native mode that does not support the traditional configuration table
  • Disabled (default): disables the CPWP function.

All versions

TStateEnable

Character string

Setting of the CPU T-state.

  • Enabled
  • Disabled (default)

All versions

EnableXE

Character string

Setting of the CPU XE version.

  • Enabled (default)
  • Disabled

All versions

OSCx

Character string

Mapping between CPU C-states and ACPI C-states.

  • ACPIC3: ACPI C3 state
  • ACPIC2 (default): ACPI C2 state

Versions earlier than 6.52

ExecuteDisableBit

Character string

Setting of the execute disable bit (EDB) instructions.

  • Enabled (default)
  • Disabled

Versions earlier than 6.52

MLCStreamerPrefetcherEnable

Character string

Setting of the hardware prefetch function.

  • Enabled (default)
  • Disabled

All versions

MLCSpatialPrefetcherEnable

Character string

Setting of the adjacent cache prefetch function.

  • Enabled (default)
  • Disabled

All versions

MonitorMwaitEnable

Character string

Setting of the Monitor/Mwait instructions.

  • Enabled (default)
  • Disabled

All versions

DCUStreamerPrefetcherEnable

Character string

Setting of the DCU stream prefetch function.

  • Enabled (default)
  • Disabled

All versions

DCUIPPrefetcherEnable

Character string

Setting of the DCU IP prefetch function.

  • Enabled (default)
  • Disabled

All versions

ProcessorX2APIC

Character string

Setting of the extended APIC function.

  • Enabled
  • Disabled (default)

All versions

BootPState

Character string

Boot performance mode.

  • MaxEfficient: achieves the maximum efficiency.
  • MaxPerformance (default): achieves the maximum performance.
  • SetbyIntelNodeManager: enables the boot performance to be controlled by the ME(available from version 6.20).

All versions

TurboPowerLimitLock

Character string

Lock of the power capping register.

  • Enabled
  • Disabled (default)

Versions earlier than 6.52

QpiLinkSpeed

Character string

Link rate.

  • Speed9.6GB/s
  • Speed10.4GB/s
  • Auto (default)
  • UsePerLinkSetting: sets the link rate for each channel(for BIOS versions earlier than 0.21 only).

All versions

KtiLinkL0pEn

Character string

Setting of the L0P mode. Currently, the PCIe 2.0 specification defines two low power modes: L0s and L1. The L0s mode concerns setting low power mode for one direction of the serial link only, usually downstream of the PHY controller. The L1 mode is bidirectional and results in greater power reductions though with the penalty of greater exit latency.

  • Enabled (default)
  • Disabled
  • Auto: automatic

All versions

KtiLinkL1En

Character string

Setting of the L1 mode. Currently, the PCIe 2.0 specification defines two low power modes: L0s and L1. The L0s mode concerns setting low power mode for one direction of the serial link only, usually downstream of the PHY controller. The L1 mode is bidirectional and results in greater power reductions though with the penalty of greater exit latency.

  • Enabled (default)
  • Disabled
  • Auto: automatic

All versions

DDRFreqLimit

Character string

Memory frequency (in MHz).

  • Freq1866
  • Freq2133
  • Freq2400
  • Freq2666
  • OvrClk2933 (available from version 6.20)
  • Auto (default)

All versions

DemandScrubMode

Character string

Setting of the demand scrub mode.

  • Enabled (default)
  • Disabled

Versions earlier than 0.17

PatrolScrub

Character string

Setting of the patrol scrub.

  • Enabled (default)
  • Disabled

All versions

FPKPortConfig0

Character string

Setting of the LAN on motherboard (LOM) devices. This parameter is available only for the 1288H V5, 2288H V5, and 5288 V5 servers from BIOS 6.58.

  • Enabled (default)
  • Disabled

6.58 and later

FPKPortConfig1

Character string

Setting of the LOM devices. This parameter is available only for the 1288H V5, 2288H V5, and 5288 V5 servers from BIOS 6.58.

  • Enabled (default)
  • Disabled

6.58 and later

FPKPortConfig2

Character string

Setting of the LOM devices. This parameter is available only for the 1288H V5, 2288H V5, and 5288 V5 servers from BIOS 6.58.

  • Enabled (default)
  • Disabled

6.58 and later

FPKPortConfig3

Character string

Setting of the LOM devices. This parameter is available only for the 1288H V5, 2288H V5, and 5288 V5 servers from BIOS 6.58.

  • Enabled
  • Disabled

6.58 and later

PCIePortDisable1

Character string

Function of setting PCIe port parameters. This parameter is available only for the 1288H V5, 2288H V5, 5288 V5, and 9008 V5 (single-system mode or system A in dual-system mode) servers from BIOS 1.09.

  • Auto (default)
  • Enabled
  • Disabled

1.09 and later

PCIePortDisable8

Character string

Function of setting PCIe port parameters. This parameter is available only for the 2488H V5 and 5885H V5 servers from BIOS 1.09.

  • Auto (default)
  • Enabled
  • Disabled

1.09 and later

PCIePortDisable85

Character string

Function of setting PCIe port parameters. This parameter is available only for the 9008 V5 (system B in dual-system mode) server from BIOS 1.09.

  • Auto (default)
  • Enabled
  • Disabled

1.09 and later

BenchMarkSelection

Character string

Energy saving application scenario.

  • Custom (default)
  • HPC: high performance computing
  • PowerEfficiency: power efficiency
  • GeneralComputingInt: general computing - inter computing
  • GeneralComputingFloat: general computing - floating-point computing
  • LowLatency: low latency
  • ServerSideJava: server side
  • MemoryThroughput: memory throughput
  • IOThroughput: I/O throughput
  • EnergySaving: energy saving
  • NFV: network functions virtualization

6.58 and later

StaticTurbo

Character string

Setting of static Turbo.

  • Auto
  • Manual
  • Disable: (default)

6.58 and later

FreqSelect

Numeric

Frequency in 100 MHz.

  • Value range: 12 to 40 (default value: 40)

6.58 and later

ClkGenSpreadSpectrumCheck

Character string

Function of setting of the clock spread spectrum.

  • Enabled: enables the setting of the clock spread spectrum.
  • Disabled (default): disables the setting of the clock spread spectrum.

1.09 and later

DisplayMode

Character string

Mode of the graphics card.

  • PluginGraphics: uses the plug-in graphics card first.
  • OnboardGraphics (default): uses the on-board graphics card first.

1.09 and later

IOAPICMode

Character string

IO APIC mode.

  • Enabled (default)
  • Disabled

1.09 and later

AcpiHPETEnable

Character string

Support for the HPET table.

  • Enabled (default)
  • Disabled

6.58 and later

SystemErrorEn

Character string

Function of recording system error.

  • Enabled (default): enables system error recording.
  • Disabled: disables system error recording.
  • Auto: enables or disables system error recording based on the default setting of Intel.

1.09 and later

PoisonEn

Character string

Setting of the system Poison mode.

  • Enabled (default)
  • Disabled

1.09 and later

FDMSupport

Character string

Setting of the fault diagnostics and management.

  • Enabled (default)
  • Disabled

1.09 and later

EMCAEn

Character string

Function of recording Enhanced Machine Check Architecture (eMCA) logs.

  • Enabled (default): enables eMCA logging. If this function is enabled, the memory has a dedicated area to store information about the MCBank register and fault DIMMs for the OS to access, and an uncorrectable error can trigger a system management interrupt (SMI).
  • Disabled: disables eMCA logging.

1.09 and later

EMCACSMIEn

Character string

Function of morphing between corrected machine check interrupt (CMCI) and SMI.

  • EMCAGen2CSMI (default)
  • EMCAGen1Lite
  • Disabled

1.09 and later

WHEASupportEn

Character string

Support for Windows Hardware Error Architecture (WHEA).

The WHEA provides hardware error reports for the server in running and helps reduce the mean time to repair (MTTR) from critical hardware errors.

  • Disabled
  • Enabled (default)

1.09 and later

WHEALogMemoryEn

Character string

Function of logging memory errors.

  • Disabled
  • Enabled (default)

1.09 and later

WHEALogProcEn

Character string

Function of logging processor errors.

  • Disabled
  • Enabled (default)

1.09 and later

WHEALogPCIEn

Character string

Function of logging PCIe device errors.

  • Disabled
  • Enabled (default)

1.09 and later

KTIFailoverSMIEn

Character string

Function of reporting an SMI alarm upon a UPI lane failover.

  • Disabled
  • Enabled (default)

1.09 and later

IIOErrorEn

Character string

Function of processing IIO/PCH global errors.

  • Disabled
  • Enabled (default)

1.09 and later

IIOErrRegistersClearEn

Character string

Function of clearing the register after processing IIO errors.

  • Disabled
  • Enabled (default)

1.09 and later

SupportOSCtrlAER

Character string

Support for the OS to control the AER error handling.

  • Disabled (default)
  • Enabled

1.09 and later

SysDBGLevel

Character string

System debug information to be provided in the power-on self-test (POST) process.

  • Disabled (default): minimizes debug information in the POST process to shorten the system startup time.
  • Debug (for 2-socket servers): outputs all debug information over the serial port in the POST process. The system startup time is longer.
  • Enabled (for 4-socket or 8-socket servers): outputs all debug information over the serial port in the POST process. The system startup time is longer.

1.09 and later

ComBaseAddr

Character string

Address of the serial device port.

  • Com3F8 (default): The port address is 3F8.
  • Com2F8: The port address is 2F8.

1.09 and later

SlotPxeDis

Character string

PXE function for the PCIe NIC on a PCIe slot.

  • Disabled
  • Enabled (default)

1.09 and later

CdnSupport

Character string

Function of making the network port device name fixed.

  • Disabled
  • Enabled (default)

6.58 and later

PXE1Setting

Character string

PXE function control of network port 1 (not for OSCA)

  • Disabled
  • Enabled (default)

1.09 and later

PXE2Setting

Character string

PXE function control of network port 2 (not for OSCA)

  • Disabled (default)
  • Enabled

1.09 and later

PXE3Setting

Character string

PXE function control of network port 3 (The 2P servers do not support OSCA or dual-port NICs. The 4P/8P servers do not support OSCA.)

  • Disabled (default value for 4P/8P servers)
  • Enabled (default value for 2P servers)

1.09 and later for 2P servers

6.58 and later for 4P/8P servers

PXE4Setting

Character string

PXE function control of network port 4 (not for OSCA and dual-port NICs)

  • Disabled (default)
  • Enabled

1.09 and later

PXE5Setting

Character string

PXE function control of network port 5 (for 2P rack servers)

  • Disabled
  • Enabled (default)

6.58 and later

PXE6Setting

Character string

PXE function control of network port 6 (for 2P rack servers)

  • Disabled (default)
  • Enabled

6.58 and later

PXE7Setting

Character string

PXE function control of network port 7 (for 2P rack servers)

  • Disabled (default)
  • Enabled

6.58 and later

PXE8Setting

Character string

PXE function control of network port 8 (for 2P rack servers)

  • Disabled (default)
  • Enabled

6.58 and later

UefiPXE1Setting

Character string

UEFI PXE1 setting (not for 4P/8P OSCA)

  • Disabled
  • Enabled (default)

1.09 and later

UefiPXE2Setting

Character string

UEFI PXE2 setting (not for 4P/8P OSCA)

  • Disabled
  • Enabled (default)

1.09 and later

UefiPXE3Setting

Character string

UEFI PXE3 setting (not for 4P/8P OSCA)

  • Disabled
  • Enabled (default)

1.09 and later

UefiPXE4Setting

Character string

UEFI PXE4 setting (not for 4P/8P OSCA)

  • Disabled
  • Enabled (default)

1.09 and later

WakeOnPME

Character string

Setting of power management event (PME) (not for OSCA)

  • Disabled (default)
  • Enabled

1.09 and later

WakeOnS5

Character string

Setting of automatic wakeup from the soft off (S5) state.

  • Disabled (default): disables automatic wakeup.
  • Daily: performs automatic wakeup from the S5 state every day.
  • Monthly: performs automatic wakeup from the S5 state every month.

1.09 and later

WakeOnS5DayOfMonth

Numeric

Date for automatic wakeup from the S5 state every month.

  • Value range: 1 to 31 (default value: 1)

1.09 and later

BootType

Character string

System boot mode.

  • UEFIBoot: UEFI (default)
  • LegacyBoot: Legacy

1.09 and later

NetworkProtocol

Character string

Network protocol to be used for PXE boot.

  • UEFIIPv4 (default)
  • UEFIIPv6
  • UEFIIPv4IPv6
  • Disabled

1.09 and later

PxeRetryCount

Numeric

Maximum number of attempts that the server boots from PXE.

  • Value range: 1 to 99 (default value: 1. The value 99 indicates the number of repeated boot times from PXE is unlimited.)

1.09 and later

SPBoot

Character string

Setting of SP boot.

  • Disabled
  • Enabled (default)

1.09 and later

BootRetry

Character string

Setting of reboot.

  • Disabled
  • Enabled (default)

6.58 and later

NoBootReset

Character string

Function of automatically rebooting the system when no boot device is available.

  • Disabled (default)
  • Enabled

6.58 and later

USBBoot

Character string

Boot from an external USB device.

  • Disabled: prevents the system from booting from an external USB device.
  • Enabled (default): allows the system to boot from an external USB device (virtual DVD drive, floppy disk drive, and physical USB flash drive).

6.58 and later

BootOverrideLegacy

Character string

Special boot device in legacy mode.

  • Disabled (default): disables booting from a special device.
  • PCIESSDFirst: boots from a PCIe SSD.
  • iSCSIFirst: boots from an iSCSI device.
  • FCFirst: boots from an FC device.
  • FCOEFirst: boots from an FCoE device.
  • PCHDirectFirst: boots from a PCH direct connection.
  • RAIDFirst: boots from RAID.
  • USBFirst: boots from a USB device.

6.58 and later

BootOverrideUEFI

Character string

Special boot device in UEFI mode.

  • Disabled (default): disables booting from a special device.
  • PCIESSDFirst: boots from a PCIe SSD.
  • iSCSIFirst: boots from an iSCSI device.
  • FCFirst: boots from an FC device.
  • FCOEFirst: boots from an FCoE device.
  • PCHDirectFirst: boots from a PCH direct connection.
  • RAIDFirst: boots from RAID.
  • USBFirst: boots from a USB device.

6.58 and later

OemSecureBoot

Character string

Secure boot.

  • Disabled (default)
  • Enabled

1.09 and later

SimplePassWord

Character string

Simplified password verification.

  • Disabled (default)
  • Enabled

1.09 and later

PowerOnPassword

Character string

Server boot password.

  • Disabled (default): No password is required.
  • Enabled: A password is required. Enter the password of the system administrator.

6.58 and later

AcsEnable

Character string

Access control service.

  • Disabled
  • Enabled (default)

6.58 and later

PostedInterrupt

Character string

Setting of the posted interrupt.

  • Disabled
  • Enabled (default)

1.09 and later

CompletionTimeout0

Character string

Setting of PCIe completion timeout.

  • Disabled
  • Enabled (default)

1.09 and later

CompletionTimeoutValue0

Character string

Timeout period for PCIe completion.

  • Timeout50usTo10ms
  • Timeout16msTo55ms
  • Timeout65msTo210ms
  • Timeout260msTo900ms (default)
  • Timeout1sTo3.5s
  • Timeout4sTo13s
  • Timeout17sTo64s

1.09 and later

CompletionTimeout1

Character string

Setting of PCIe completion timeout.

  • Disabled
  • Enabled (default)

1.09 and later

CompletionTimeoutValue1

Character string

Timeout period for PCIe completion.

  • Timeout50usTo10ms
  • Timeout16msTo55ms
  • Timeout65msTo210ms
  • Timeout260msTo900ms (default)
  • Timeout1sTo3.5s
  • Timeout4sTo13s
  • Timeout17sTo64s

1.09 and later

CompletionTimeout2

Character string

PCIe completion timeout (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

CompletionTimeoutValue2

Character string

Timeout period for PCIe completion (for 4P and 8P servers)

  • Timeout50usTo10ms
  • Timeout16msTo55ms
  • Timeout65msTo210ms
  • Timeout260msTo900ms (default)
  • Timeout1sTo3.5s
  • Timeout4sTo13s
  • Timeout17sTo64s

1.09 and later

CompletionTimeout3

Character string

PCIe completion timeout (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

CompletionTimeoutValue3

Character string

Timeout period for PCIe completion (for 4P and 8P servers)

  • Timeout50usTo10ms
  • Timeout16msTo55ms
  • Timeout65msTo210ms
  • Timeout260msTo900ms (default)
  • Timeout1sTo3.5s
  • Timeout4sTo13s
  • Timeout17sTo64s

1.09 and later

CompletionTimeout4

Character string

PCIe completion timeout (for 8P servers)

  • Disabled
  • Enabled (default)

1.09 and later

CompletionTimeoutValue4

Character string

Timeout period for PCIe completion (for 8P servers)

  • Timeout50usTo10ms
  • Timeout16msTo55ms
  • Timeout65msTo210ms
  • Timeout260msTo900ms (default)
  • Timeout1sTo3.5s
  • Timeout4sTo13s
  • Timeout17sTo64s

1.09 and later

CompletionTimeout5

Character string

PCIe completion timeout (for 8P servers)

  • Disabled
  • Enabled (default)

1.09 and later

CompletionTimeoutValue5

Character string

Timeout period for PCIe completion (for 8P servers)

  • Timeout50usTo10ms
  • Timeout16msTo55ms
  • Timeout65msTo210ms
  • Timeout260msTo900ms (default)
  • Timeout1sTo3.5s
  • Timeout4sTo13s
  • Timeout17sTo64s

1.09 and later

CompletionTimeout6

Character string

PCIe completion timeout (for 8P servers)

  • Disabled
  • Enabled (default)

1.09 and later

CompletionTimeoutValue6

Character string

Timeout period for PCIe completion (for 8P servers)

  • Timeout50usTo10ms
  • Timeout16msTo55ms
  • Timeout65msTo210ms
  • Timeout260msTo900ms (default)
  • Timeout1sTo3.5s
  • Timeout4sTo13s
  • Timeout17sTo64s

1.09 and later

CompletionTimeout7

Character string

PCIe completion timeout (for 8P servers)

  • Disabled
  • Enabled (default)

1.09 and later

CompletionTimeoutValue7

Character string

Timeout period for PCIe completion (for 8P servers)

  • Timeout50usTo10ms
  • Timeout16msTo55ms
  • Timeout65msTo210ms
  • Timeout260msTo900ms (default)
  • Timeout1sTo3.5s
  • Timeout4sTo13s
  • Timeout17sTo64s

1.09 and later

PCIeLinkDis1

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed1

Character string

Link rate of the port.

  • Auto (default): automatically sets the link rate based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable2

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis2

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed2

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable3

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis3

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed3

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable4

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis4

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed4

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable5

Character string

Function of setting PCIe port parameters. The default value is Enabled for G560 V5.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis5

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed5

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable6

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis6

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed6

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable7

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis7

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed7

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIeLinkDis8

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed8

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable9

Character string

Function of setting PCIe port parameters (the default value is Enabled for CH121V5 and CH221V5 compute nodes).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis9

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed9

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable10

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis10

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed10

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable11

Character string

Function of setting PCIe port parameters (the default value is Enabled for CH121V5 and CH221V5 compute nodes).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis11

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed11

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable12

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis12

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed12

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable13

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis13

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed13

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable17

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis17

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed17

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable21

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis21

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed21

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable22

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis22

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed22

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable23

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis23

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed23

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable24

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis24

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed24

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable25

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis25

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed25

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable26

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis26

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed26

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable27

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis27

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed27

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable28

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis28

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed28

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable29

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis29

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed29

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable30

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis30

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed30

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable31

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis31

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed31

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable32

Character string

Function of setting PCIe port parameters (the default value is Enabled for CH121V5 and CH221V5 compute nodes).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis32

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed32

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable33

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis33

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed33

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable34

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis34

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed34

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable38

Character string

Function of setting PCIe port parameters.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis38

Character string

Setting of the port link.

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed38

Character string

Link rate of the port.

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable42

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis42

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed42

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable43

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis43

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed43

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable44

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis44

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed44

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable45

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis45

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed45

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable46

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis46

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed46

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable47

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis47

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed47

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable48

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis48

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed48

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable49

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis49

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed49

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable50

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis50

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed50

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable51

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis51

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed51

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable52

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis52

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed52

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable53

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis53

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed53

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable54

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis54

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed54

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable55

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis55

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed55

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable59

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis59

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed59

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable63

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis63

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed63

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable64

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis64

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed64

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable65

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis65

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed65

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable66

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis66

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed66

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable67

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis67

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed67

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable68

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis68

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed68

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable69

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis69

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed69

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable70

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis70

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed70

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable71

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis71

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed71

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable72

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis72

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed72

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable73

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis73

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed73

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable74

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis74

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed74

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable75

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis75

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed75

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable76

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis76

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed76

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable80

Character string

Function of setting PCIe port parameters (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis80

Character string

Setting of the port link (for 4P and 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed80

Character string

Link rate of the port (for 4P and 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable84

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis84

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed84

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIeLinkDis85

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed85

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable86

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis86

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed86

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable87

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis87

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed87

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable88

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis88

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed88

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable89

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis89

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed89

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable90

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis90

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed90

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable91

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis91

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed91

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable92

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis92

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed92

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable93

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis93

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed93

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable94

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis94

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed94

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable95

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis95

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed95

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable96

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis96

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed96

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable97

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis97

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed97

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable101

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis101

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed101

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable105

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis105

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed105

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable106

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis106

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed106

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable107

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis107

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed107

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable108

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis108

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed108

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable109

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis109

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed109

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable110

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis110

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed110

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable111

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis111

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed111

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable112

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis112

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed112

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable113

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis113

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed113

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable114

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis114

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed114

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable115

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis115

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed115

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable116

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis116

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed116

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable117

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis117

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed117

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable118

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis118

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed118

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable122

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis122

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed122

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable126

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis126

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed126

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable127

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis127

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed127

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable128

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis128

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed128

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable129

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis129

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed129

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable130

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis130

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed130

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable131

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis131

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed131

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable132

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis132

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed132

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable133

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis133

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed133

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable134

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis134

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed134

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable135

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis135

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed135

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable136

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis136

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed136

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable137

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis137

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed137

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable138

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis138

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed138

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable139

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis139

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed139

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable143

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis143

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed143

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable147

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis147

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed147

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable148

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis148

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed148

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable149

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis149

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed149

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable150

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis150

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed150

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable151

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis151

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed151

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable152

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis152

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed152

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable153

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis153

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed153

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable154

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis154

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed154

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable155

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis155

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed155

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable156

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis156

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed156

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable157

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis157

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed157

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable158

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis158

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed158

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable159

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis159

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed159

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable160

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis160

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed160

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCIePortDisable164

Character string

Function of setting PCIe port parameters (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

PCIeLinkDis164

Character string

Setting of the port link (for 8P servers).

  • Disabled
  • Enabled (default)

1.09 and later

PCIePortLinkSpeed164

Character string

Link rate of the port (for 8P servers).

  • Auto (default): set automatically based on actual situation.
  • Gen1: 2.5 GT/s
  • Gen2: 5 GT/s
  • Gen3: 8 GT/s

1.09 and later

PCI64BitResourceAllocation

Character string

Function of allocating PCIe 64-bit resources.

  • Enabled (default)
  • Disabled

1.09 and later

MCTPEn

Character string

MCTP menu.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeGlobalASPM

Character string

Setting of active state power management (ASPM) for all the PCIe devices (not for 2488 V5, 2488H V5, 5885H V5, 8100 V5, and CH242V5).

  • Disabled (default)
  • Per-Port: enables ASPM per port.
  • L1Only: enters L1 mode only.

1.09 and later

PcieRelaxedOrdering

Character string

PCIe relaxed ordering.

  • Enabled (default)
  • Disabled

6.58 and later

ISOCEn

Character string

Setting of the Iscochronous (ISOC) mode. Enabling the ISOC mode improves data transmission quality but comprises memory bandwidth and performance.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • DisabledISOC Mode

1.09 and later

SerialDebugMsgLvl

Character string

Level of the debug logs to be output over the serial port.

  • Disabled (default): disables debug logs over the serial port.
  • Minimum: outputs errors and logs of higher levels over the serial port.
  • Normal: outputs alarms and logs of higher levels over the serial port.
  • Maximum: outputs logs of informational and higher levels over the serial port.

1.09 and later

MmiohBase

Character string

Start address of the Memory Mapped I/O High (MMIOH). The default value is STR_56T for 4P, 8P, X6000 V5, CH121 V5, and CH242 V5, and STR_13T for 2P rack servers, G530 V5, G560 V5, and CH221 V5.

  • STR_56T
  • STR_40T
  • STR_24T
  • STR_16T
  • STR_4T
  • STR_1T
  • STR_3T5
  • STR_13T
  • STR_3T

6.58 and later

MmiohSize

Character string

MMIOH unit size for each stack.

  • STR_1G
  • STR_4G
  • STR_16G
  • STR_64G (default)
  • STR_256G
  • STR_1024G

6.58 and later

AttemptFastBootCold

Character string

Setting of the fast cold boot.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

MemTestOnFastBoot

Character string

Setting of the memory test during the fast boot process.

  • Auto (default): set automatically based on actual situation.
  • Enabled enables the memory test during the fast boot process.
  • Disabled: disables the memory test during the fast boot process.

1.09 and later

RMTOnColdFastBoot

Character string

Setting of the RMT test in the fast cold boot process.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

1.09 and later

CustomRefreshRateEn

Character string

Function of customizing memory refresh.

  • Enabled
  • Disabled (default)

1.09 and later

CustomRefreshRate

Numeric

Customized memory refresh rate.

  • Value range: 20 to 40 (default value: 20)

1.09 and later

refreshMode

Character string

Memory refresh mode. The default value is DynamicMode for the 2P servers and Static2XMode for 4P and 8P servers.

  • Static2XMode: forced 2x auto-refresh mode
  • DynamicMode: dynamic refresh mode

1.09 and later

EnforcePOR

Character string

Function of enforce POR. If enabled, the DIMMs will be populated as Intel recommended.

  • Auto (default): set automatically based on actual situation.
  • Enabled
  • Disabled

6.58 and later

PagePolicy

Character string

Page management policy.

  • Auto (default): set automatically based on actual situation.
  • Closed
  • Adaptive

1.09 and later

MemInterleaveGran1LM

Character string

Granularity of 1LM memory interleaving.

  • Auto (default): set automatically based on actual situation.
  • Target256BChannel256B: 256B Channel
  • Target64BChannel64B: 64B Channel

1.09 and later

IMCInterleaving

Character string

Integrated Memory Controller (IMC) interleaving mode.

  • Auto (default): set automatically based on actual situation.
  • Interleave1way
  • Interleave2way

1.09 and later

ChannelInterleaving

Character string

Channel interleaving mode. Generally, higher-level interleaving allows high performance. However, lower-level interleaving helps reduce power consumption.

  • Auto (default): set automatically based on actual situation.
  • Interleave1way
  • Interleave2way
  • Interleave3way

1.09 and later

RankInterleaving

Character string

Memory rank interleaving mode. Generally, higher-level interleaving allows high performance. However, lower-level interleaving helps reduce power consumption.

  • Auto (default): set automatically based on actual situation.
  • Interleave1way
  • Interleave2way
  • Interleave4way
  • Interleave8way

1.09 and later

SocketInterleaveBelow4GB

Character string

Function of splitting the 0-4GB address space between two sockets, so that both sockets get a chunk of local memory below 4 GB.

  • Enabled
  • Disabled (default)

1.09 and later

volMemMode

Character string

Non-volatile memory mode.

  • Auto (default): set automatically based on actual situation.
  • MemMode1LM
  • MemMode2LM

6.58 and later

PmemCaching

Character string

AppDirect cache.

  • Auto: Automatically set based on scenarios.
  • Enabled
  • Disabled (default)

6.58 and later

EadrSupport

Character string

Support for eADR.

  • Auto: Automatically set based on scenarios.
  • Enabled
  • Disabled (default)

6.58 and later

APEISupport

Character string

Support for ACPI platform error interface (APEI).

  • Enabled (default)
  • Disabled

1.09 and later

APEIEinjType

Character string

Setting of APEI error injection.

  • MemoryCE: injects correctable non-fatal errors.
  • MemoryUENonFatal: injects uncorrectable non-fatal errors.
  • MemoryUEFatal: injects uncorrectable fatal errors.
  • PCIeCE: injects correctable errors.
  • PCIeUENonFatal: injects PCIe uncorrectable non-fatal errors.
  • PCIeUEFatal: injects PCIe uncorrectable fatal errors.
  • Disabled (default): disables APEI error injection.

1.09 and later

GlobalTerminalType

Character string

Target terminal emulation type for console redirection. It must be the same as the mode used by the terminal program.

  • VT100 (default)
  • VT100Plus
  • VTUTF8
  • PCANSI
  • LOGTERM

1.09 and later

GlobalDataBits

Character string

Data transmission size (in bits) for console redirection.

  • Bits7
  • Bits8 (default)

1.09 and later

GlobalParity

Character string

Parity check for console redirection.

  • None: disable parity checks.
  • Even: sends even bits with regular data bits to detect data transmission errors.
  • Odd: sends an odd bit with regular data bits to detect data transmission errors.

1.09 and later

GlobalStopBits

Character string

Stop bit that indicates the end of a serial data packet.

  • Bit1 (default)
  • Bits2

1.09 and later

GlobalFlowControl

Character string

Flow control in serial port redirection.

  • None: disables flow control for serial port redirection.
  • RTSCTS: Request To Send (RTS)/Clear To Send (CTS)
  • XONXOFF: sends an XON or XOFF character to the data transmitter based on the data volume in the input cache of the data receiver.

1.09 and later

CRInfoWaitTime

Character string

Time (in seconds) for which the console redirection firmware information is displayed on the BIOS screen.

  • Seconds0 (default)
  • Seconds2
  • Seconds5
  • Seconds10
  • Seconds30

1.09 and later

CRAfterPost

Character string

Specifies whether serial port redirection will work after a power-on self-test (POST). The setting affects only the display of GRand Unified Bootloader (GRUB) and DOS. It does not affect the operating system because the serial port redirection is controlled by the OS.

  • Yes (default): Serial port redirection still works after a POST.
  • No

1.09 and later

AutoRefresh

Character string

Auto refresh of the screen after a remote terminal is connected.

  • Enabled
  • Disabled (default)

1.09 and later

PCIeRootPortEn19

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM19

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed19

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE19

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology19

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize19

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn18

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM18

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed18

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE18

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology18

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize18

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn17

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM17

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed17

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE17

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology17

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize17

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn16

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM16

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed16

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE16

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology16

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize16

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn15

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM15

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed15

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE15

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology15

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize15

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn14

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM14

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed14

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE14

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology14

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize14

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn13

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM13

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed13

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE13

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology13

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize13

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn12

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM12

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed12

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE12

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology12

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize12

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn11

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM11

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed11

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE11

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology11

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize11

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn10

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM10

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed10

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE10

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology10

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize10

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn9

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM9

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed9

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE9

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology9

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize9

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn8

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM8

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed8

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE8

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology8

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize8

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn7

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM7

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed7

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE7

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology7

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize7

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn6

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM6

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed6

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE6

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology6

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize6

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn3

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM3

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed3

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE3

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology3

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize3

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn2

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM2

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed2

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE2

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology2

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize2

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn1

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM1

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed1

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE1

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology1

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize1

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCIeRootPortEn0

Character string

Setting of the PCIe port.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeRootPortASPM0

Character string

Setting of the PCIe ASPM function.

  • Disabled (default)
  • L1Only
  • Auto

1.09 and later

PCIeRootPortSpeed0

Character string

PCIe transmission rate.

  • Auto (default)
  • Gen1: sets the rate to Gen1.
  • Gen2: sets the rate to Gen2.
  • Gen3: sets the rate to Gen3.

1.09 and later

PCIeRootPortMSIE0

Character string

Message interrupt mode.

  • Enabled (default)
  • Disabled

1.09 and later

PCIeTopology0

Character string

PCIe path topology.

  • Unknown (default): sets the mode to unknown mode.
  • X1: sets the bandwidth to x1 mode.
  • X4: sets the bandwidth to x4 mode.
  • SATAExpress: set the mode to SATA.
  • M2: sets the mode to M2.

1.09 and later

PCIeRootPortMaxPayLoadSize0

Character string

Maximum payload size for the PCIe port.

  • MPL128B (default)
  • MPL256B

1.09 and later

PCHPCIeGlobalASPM

Character string

Setting of the ASPM function of all subordinate devices.

  • PerIndividualPort (default): enables ASPM per port.
  • L1Only: enters L1 mode only.

1.09 and later

PCHPCIeUX16MaxPayloadSize

Character string

Maximum payload size of the uplink PCIe x16.

  • MPL128B
  • MPL256B
  • MPL512B (default)

1.09 and later

PCHPCIeUX8MaxPayloadSize

Character string

Maximum payload size of the uplink PCIe x8.

  • MPL128B
  • MPL256B
  • MPL512B (default)

1.09 and later

UFSDisable

Character string

Setting of the uncore frequency scaling (UFS) function. The UFS allows the processors to adjust the voltage and frequency of its cores and non-cores through the internal voltage regulator. The UFS implements optimal power distribution between CPU cores and uncores to achieve the highest power performance.

  • Enabled (default): enables optimal frequency.
  • DisabledMax: disables the maximum frequency.
  • DisabledMin: disables the minimum frequency.

1.09 and later

LowOccupyControl

Character string

Low occupancy control.

  • Enabled
  • Disabled (default)

6.58 and later

AvxIccpLevel

Character string

AVX ICCP pre-grant level.

  • IccpLevel128Heavy (default)
  • IccpLevel256Light
  • IccpLevel256Heavy
  • IccpLevel512Light
  • IccpLevel512Heavy

6.58 and later

TcoTimeout

Numeric

Unit: 0.6s

  • Value range: 2 to 10 (default value: 2)

6.58 and later

ConfigTDPLevel

Character string

TDP level.

  • Nominal (default)
  • Level 1
  • Level 2

1.09 and later

IntelSpeedSelectSupport

Character string

Support for Intel ISS.

  • Base (default): TDP Level0
  • Config1: TDP Level3
  • Config2: TDP Level4

6.58 and later

ProcessorEISTPSDFunc

Character string

Component in charge of adjusting the CPU P-states.

  • SWAny: The OS Power Manager is responsible for coordinating the P-states among logical processors with dependency and can initiate the transition on all of those logical processors.
  • SWAll: The OS Power Manager is responsible for coordinating the P-states among logical processors with dependency and muSt initiate the transition on all of those logical processors.
  • HWAll (default): The processor hardware is responsible for coordinating the P-states among logical processors with dependency. The operating system is responsible for maintaining the latest P-state request on all logic processors.

1.09 and later

ProcessorSinglePCTLEn

Character string

Single_PCTL mode.

  • Enabled
  • Disabled (default)

1.09 and later

ProcessorSPD

Character string

SPD setting.

  • Enabled
  • Disabled (default)

1.09 and later

EETurboDisable

Character string

Setting of the Energy Efficient Turbo feature.

  • Enabled (default)
  • Disabled

6.58 and later

EnableThermalMonitor

Character string

Temperature monitoring.

  • Enabled (default)
  • Disabled

1.09 and later

ProchotResponseRatio

Numeric

Percentage of CPU overheating alarms.

  • Value range: 0 to 255 (default value: 0)

1.09 and later

EnableProcHot

Character string

CPU overheating alarm mode.

  • OutputOnly
  • Disabled
  • InputOutput
  • InputOnly (default)

1.09 and later

TCCActivationOffset

Numeric

TCC trigger offset.

  • Value range: 0 to 15 (default value: 0)

1.09 and later

OnDieThermalThrottling

Character string

CPU T-state throttle level.

  • Disabled (default)
  • Level6.25
  • Level12.5
  • Level18.75
  • Level25.0
  • Level31.25
  • Level37.5
  • Level43.7
  • Level50.0
  • Level56.25
  • Level62.5
  • Level68.75
  • Level75.0
  • Level81.25
  • Level87.5
  • Level93.75

1.09 and later

PackageCState

Character string

Setting of package C-state.

  • Auto (default)
  • NoLimit: no limit
  • C6RetentionState: C6 (Retention) state
  • C6NonRetentionState: C6 (non-Retention) state
  • C2State: C2 state (not for 4P and 8P servers)
  • C0C1State: C0/C1 state

1.09 and later

PkgCLatNeg

Character string

Latency negotiation setting.

  • Enabled
  • Disabled (default)

1.09 and later

OverclockingLock

Character string

Function of locking CPU overclocking. After this function is enabled, you can set the CPU Turbo ratio limit.

  • Enabled (default)
  • Disabled

1.09 and later

TurboRatioLimitCores7

Numeric

Setting of the CPU C-state.

  • Value range: 0 to 255 (default value: 0)

6.58 and later

TurboRatioLimitRatio7

Numeric

Turbo ratio limit for the CPU.

  • Value range: 0 to 80 (default value: 0)

6.58 and later

TurboRatioLimitCores6

Numeric

Setting of the CPU C-state.

  • Value range: 0 to 255 (default value: 0)

6.58 and later

TurboRatioLimitRatio6

Numeric

Turbo ratio limit for the CPU.

  • Value range: 0 to 80 (default value: 0)

6.58 and later

TurboRatioLimitCores5

Numeric

Setting of the CPU C-state.

  • Value range: 0 to 255 (default value: 0)

6.58 and later

TurboRatioLimitRatio5

Numeric

Turbo ratio limit for the CPU.

  • Value range: 0 to 80 (default value: 0)

6.58 and later

TurboRatioLimitCores4

Numeric

Setting of the CPU C-state.

  • Value range: 0 to 255 (default value: 0)

6.58 and later

TurboRatioLimitRatio4

Numeric

Turbo ratio limit for the CPU.

  • Value range: 0 to 80 (default value: 0)

6.58 and later

TurboRatioLimitCores3

Numeric

Setting of the CPU C-state.

  • Value range: 0 to 255 (default value: 0)

6.58 and later

TurboRatioLimitRatio3

Numeric

Turbo ratio limit for the CPU.

  • Value range: 0 to 80 (default value: 0)

6.58 and later

TurboRatioLimitCores2

Numeric

Setting of the CPU C-state.

  • Value range: 0 to 255 (default value: 0)

6.58 and later

TurboRatioLimitRatio2

Numeric

Turbo ratio limit for the CPU.

  • Value range: 0 to 80 (default value: 0)

6.58 and later

TurboRatioLimitCores1

Numeric

Setting of the CPU C-state.

  • Value range: 0 to 255 (default value: 0)

6.58 and later

TurboRatioLimitRatio1

Numeric

Turbo ratio limit for the CPU.

  • Value range: 0 to 80 (default value: 0)

6.58 and later

TurboRatioLimitCores0

Numeric

Setting of the CPU C-state.

  • Value range: 0 to 255 (default value: 0)

6.58 and later

TurboRatioLimitRatio0

Numeric

Turbo ratio limit for the CPU.

  • Value range: 0 to 80 (default value: 0)

6.58 and later

ProcessorHWPMInterrupt

Character string

Hardware P-states interrupt.

  • Enabled
  • Disabled (default)

1.09 and later

ProcessorEPPEnable

Character string

ENERGY_PERFORMANCE_PREFERENCE control setting.

  • Enabled (default)
  • Disabled

1.09 and later

ProcessorEPPProfile

Character string

Energy saving policy to be used.

  • Performance: allows processors to run in the maximum power and performance state for optimal performance.
  • BalancedPerformance (default): maintains balanced performance between processors.
  • BalancedPower: maintains balanced power consumption between the processors.
  • Power: reduces processor speed and power usage to maintain a lower maximum power usage.

1.09 and later

ProcessorRaplPrioritization

Character string

Setting of the RAPL priority.

  • Enabled
  • Disabled (default)

6.58 and later

DirectoryModeEn

Character string

Directory mode.

  • Enabled (default)
  • Disabled

1.09 and later

SNCEn

Character string

Setting of the SNC function.

  • Enabled
  • Disabled
  • Auto (default)

1.09 and later

XPTPrefetchEn

Character string

XPT prefetch.

  • Enabled
  • Disabled
  • Auto (default)

1.09 and later

KTIPrefetchEn

Character string

KTI prefetch.

  • Enabled (default)
  • Disabled

1.09 and later

IRQThreshold

Character string

Setting of the local/remote threshold.

  • Manual: set by the user.
  • Disabled: disables the setting of the local/remote threshold.
  • High: sets the threshold a high value.
  • Medium: sets the threshold a medium value.
  • Low: sets the threshold a low value.
  • Auto (default)

1.09 and later

Irq

Numeric

IRQ Threshold

  • Value range: 1 to 31 (default value: 7)

6.58 and later

Rrq

Numeric

RRQ Threshold

  • Value range: 1 to 31 (default value: 7)

6.58 and later

StaleAtoSOptEn

Character string

Function of alternating between the SnoopAll (A) and Shared (S) states. Enabling this option can reduce the delay in memory access across CPUs.

  • Enabled
  • Disabled
  • Auto (default)

6.58 and later

LLCDeadLineAlloc

Character string

Setting of last level cache (LLC) dead line allocation. In the Skylake cache scheme, mid-level cache (MLC) evictions are filled into the LLC. If a line is evicted from the MLC to the LLC, the Skylake core can flag the evicted MLC lines as "dead". This means that the lines are not likely to be read again. This option allows dead lines to be dropped and never fill the LLC if the option is disabled.

  • Enabled (default)
  • Disabled
  • Auto

1.09 and later

MemhotSupport

Character string

Mode of the memory hot throttling.

  • OutputOnly (default): Only the output mode is supported.
  • Disabled: disables memory hot throttling.
  • InputOnly: Only the input mode is supported.
  • InputOutput: Both input and output modes are supported.

1.09 and later

MemhotOutputOnlyOpt

Character string

Output mode of memory hot throttling.

  • TemphiOnly: enables temphi alarming.
  • Disabled: disables the output mode of memory hot throttling.
  • TemphiTempmid: enables temphi & mid alarming.
  • TemphiTempmidTemplow (default): enables temphi, mid, and low alarming.

1.09 and later

Thermalthrottlingsupport

<