No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
FusionServer Tools 2.0 uREST User Guide 16
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the Diagnosis Configuration Resource of the Smart Provisioning Service

Querying the Diagnosis Configuration Resource of the Smart Provisioning Service

Function

Query the diagnosis configuration resource information of the Smart Provisioning service.

Format

./urest -H HOST -p PORT -U USERNAME -P PASSWORD getspdiagnose

Parameters

Parameter

Description

Value

HOST

IPv4 or IPv6 address or domain name of the server iBMC. It is a mandatory parameter. If an IPv6 address is used, the IPv6 address must be included in square brackets, such as [1001::1001].

-

PORT

Port number. The default value is 443. It is an optional parameter.

If the actual port number is not 443, enter the actual port number.

USERNAME

User name of the iBMC administrator. It is a mandatory parameter.

-

PASSWORD

Password of the iBMC administrator. It is a mandatory parameter.

-

Usage Guidelines

This function is supported only when the BIOS version of the FusionServer V5 server or TaiShan 200 server is later than 0.39 and the Smart Provisioning version is 115 or later.

Example

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** getspdiagnose
usage: urest getspdiagnose [-h]
 
optional arguments:
  -h, --help  show this help message and exit

System Response

Parameter

Description

DeviceType

Device type. The options are as follows:

  • CPU
  • Memory
  • Disk

Mode

Diagnosis type. The options are as follows:

  • Quick
  • Full

DurationMinutes

Diagnosis duration. This parameter is required only when the CPU is diagnosed. The unit is minute. The value is an integer ranging from 1 to 10000.

Translation
Download
Updated: 2020-02-13

Document ID: EDOC1000176182

Views: 130897

Downloads: 601

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next