No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Tools 2.0 uREST User Guide 16

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restoring Default Controller Settings

Restoring Default Controller Settings

Function

Restore default controller settings.

Only out-of-band RAID controller cards are supported.

Format

./urest -H HOST -p PORT -U USERNAME -P PASSWORD --timeout=TIMEOUT restoreraid -I CONTROLLERID

Parameters

Parameter

Description

Value

HOST

iBMC IP address or domain name. It is a mandatory parameter. If an IPv6 address is used, the IPv6 address must be included in square brackets, such as [1001::1001].

-

PORT

Port number. The default value is 443. It is an optional parameter.

Enter the port number if the default value 443 is not used.

USERNAME

iBMC user name. It is a mandatory parameter.

-

PASSWORD

Password of the iBMC user. It is a mandatory parameter.

-

TIMEOUT

Timeout interval for accessing the iBMC Redfish interface. It is an optional parameter. The default value is 30 seconds.

The value ranges from 10 to 1000, and the unit is seconds.

CONTROLLERID

Controller ID. It is a mandatory parameter.

-

Usage Guidelines

None

Example

Obtain help information.

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** restoreraid -h 
usage: urest restoreraid [-h] -I CONTROLLERID
 
optional arguments:
  -h, --help       show this help message and exit
  -I CONTROLLERID  RAID controller ID

Restore default controller settings.

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** restoreraid -I 0 
Success: successfully completed request
Translation
Download
Updated: 2020-02-13

Document ID: EDOC1000176182

Views: 122436

Downloads: 591

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next