No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Tools 2.0 uREST User Guide 16

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Error Message "Failure: This operation is not supported." Is Displayed During the Smart Provisioning Upgrade

Error Message "Failure: This operation is not supported." Is Displayed During the Smart Provisioning Upgrade

Symptom

The first upgrade is interrupted, and the queried Smart Provisioning information is None. Then the upgrade fails again, and error message "Failure: This operation is not supported." is returned.

Figure 4-3 Smart Provisioning upgrade fails again

Cause Analysis

The Smart Provisioning upgrade process is interrupted.

Solution

  • Wait until the Smart Provisioning information is displayed properly, and then perform the upgrade.
  • Reinstall Smart Provisioning.
Translation
Download
Updated: 2020-02-13

Document ID: EDOC1000176182

Views: 122188

Downloads: 591

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next