No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Tools 2.0 uREST User Guide 16

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing the RAID Configuration of a Specified Controller

Clearing the RAID Configuration of a Specified Controller

Function

Clear the RAID configuration of a specified controller.

Only out-of-band RAID controller cards are supported.

Format

./urest –H HOST -p PORT -U USERNAME -P PASSWORD resetraid –CI CONTROLLERID --force

Parameter Description

Parameter

Description

Value

HOST

Specifies the IPv4/IPv6 address or domain name of the server iBMC. It is a mandatory parameter. If an IPv6 address is used, the IPv6 address must be enclosed in parentheses, for example, [1001::1001].

-

PORT

Specifies the port number. The default value is 443. It is an optional parameter.

If the actual port number is not 443, enter the actual port number.

USERNAME

Specifies the iBMC administrator user name. It is a mandatory parameter.

-

PASSWORD

Specifies the iBMC administrator password. It is a mandatory parameter.

-

CONTROLLERID

Controller ID. It is a mandatory parameter.

-

--force

Specifies deletion in the silent mode. It is an optional parameter.

-

Usage Guidelines

The interface is applicable to uREST V118 or later versions.

Example

Obtain the help information.

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** resetraid -h
usage: urest resetraid [-h] -CI CONTROLLERID [--force]
 
optional arguments:
  -h, --help        show this help message and exit
  -CI CONTROLLERID  RAID controller ID
  --force           silent deletion

Clear the RAID configuration of a specified controller.

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** resetraid -CI 0
Are you sure you want to delete RAID card configurations and restore default configurations of the controller? (y/n): y
Success: successfully completed request

Clear the RAID configuration of a specified controller in the silent mode.

[root@localhost bin]# ./urest -H 10.10.10.10 -U ****** -P ****** resetraid -CI 0 --force
Success: successfully completed request
Translation
Download
Updated: 2020-02-13

Document ID: EDOC1000176182

Views: 121251

Downloads: 588

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next