No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Rack Server iBMC (V260 to V278) User Guide 12

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the IP Address of the Management Network Port

Querying the IP Address of the Management Network Port

You can query and set the IP address of the management network port by using:

  • Basic input/output system (BIOS)

  • iBMC CLI over the serial port

Default IP Addresses

Table 4-2 lists the default IP addresses of the iBMC management network port.

Table 4-2 Default IP address

Product Type

Slot No.

IP Address

RH8100 V3/

8100 V5

8-socket single system

192.168.2.100

4-socket dual systems

  • Primary management network port: 192.168.2.100
  • Secondary management network port: 192.168.2.101

Other rack servers

-

192.168.2.100

Querying and Setting the IP Address on the BIOS (RH8100 V3)

  1. Restart the server.

    NOTE:

    The startup time of a server varies depending on its configuration. It takes 20 minutes to start a fully configured server.

  2. During the startup process, press Del when the BIOS startup screen is displayed.
  3. Enter the password and press Enter, as shown in Figure 4-9.

    NOTE:
    • The default BIOS password is Huawei12#$. For security purposes, change the default password upon the first login and change the password periodically.
    • If an incorrect BIOS password is entered for three consecutive times, the BIOS will be locked. You can press Ctrl+Alt+Del to unlock the BIOS.
    Figure 4-9 Entering the password

  4. Choose Server Mgmt > BMC network configuration, and press Enter.

    The BMC network configuration screen is displayed, as shown in Figure 4-10.

    Figure 4-10 BMC network configuration screen

    You can obtain the IP address information on this screen.

  5. (Optional) Change the IP address.

    1. Select the IP address to be changed, and press Enter.
    2. Enter the new IP address in the displayed dialog box, and press Enter.

Querying and Setting the IP Address on the BIOS (Other Rack Servers)

  1. Restart the server.
  2. During the startup process, press Delete repeatedly when the following screen is displayed.

    Figure 4-11 BIOS startup screen

  3. Enter the password and press Enter, as shown in Figure 4-12.

    You can obtain the default password from the nameplate of the server.

    Figure 4-12 Entering the password

  4. Choose Advanced > IPMI iBMC Configuration, and press Enter.

    The IPMI iBMC Configuration screen displayed.

  5. Select iBMC Configuration and press Enter.

    The iBMC Configuration screen is displayed, as shown in Figure 4-13.

    You can obtain the management port IP address on this screen.

    Figure 4-13 BMC Configuration screen

  6. (Optional) Change the IP address.

    1. Select the IP address to be changed, and press Enter.
    2. Enter the new IP address in the displayed dialog box, and press Enter.

Download
Updated: 2019-06-04

Document ID: EDOC1000177670

Views: 121102

Downloads: 575

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next