No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Rack Server iBMC (V260 to V278) User Guide 11

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the UID Indicator (identify)

Setting the UID Indicator (identify)

Function

The identify command is used to set the UID indicator.

Format

ipmcset -d identify [ -v {time | force }]

Parameters

Parameter Description Value
time Specifies the time (in seconds) for which the UID indicator blinks.

Value range: 0 to 255

The value 0 indicates that the UID indicator is off.

force Forces the UID indicator to be steady on. -

Usage Guidelines

If time is not set, the UID indicator blinks for 15 seconds by default.

Example

# Turn on the UID indicator permanently.

iBMC:/->ipmcset -d identify -v force
Identify UID led successfully.
Download
Updated: 2019-02-28

Document ID: EDOC1000177670

Views: 109726

Downloads: 566

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next