No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 14

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Uploading the NTP Group Key (ntp -d groupkey)

Uploading the NTP Group Key (ntp -d groupkey)


The ntp -d groupkey command is used to upload the NTP group key to the iBMC. The NTP group key is used in identity authentication for communication between the iBMC and the NTP server.


ipmcset -t ntp -d groupkey -v filepath





filepath Specifies the file that contains the group key. In the /file path/file name format. For example, /tmp/ntp.keys.

Usage Guidelines

Before running this command, use a file transfer tool that supports SFTP, for example WinSCP, to transfer the key file to the specified directory (for example /tmp) of the iBMC file system.


# Upload the NTP group key to the iBMC.

iBMC:/->ipmcset -t ntp -d groupkey -v /tmp/ntp.keys
Set NTP group key (/tmp/ntp.keys) successfully.

# Query NTP information.

iBMC:/->ipmcget -d ntpinfo
Status             : enabled
Mode               : manual
Preferred Server   :
Alternative Server : fc00::1234
Synchronize        : successful
Auth Enable        : enabled
Group Key          : imported 
Updated: 2019-11-19

Document ID: EDOC1000177670

Views: 169743

Downloads: 708

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next