No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 13

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Rolling Back the iBMC Software (rollback)

Rolling Back the iBMC Software (rollback)

Function

The rollback command is used to switch the iBMC firmware from the image file in the primary partition to the image file in the secondary partition.

Format

ipmcset -d rollback

Parameters

None

Usage Guidelines

  • In single-system mode, run the rollback command on the primary iBMC will roll back the primary iBMC and secondary iBMC simultaneously.
  • In dual-system mode, the rollback command will roll back only the iBMC on which the command is executed.
  • This command switches the iBMC firmware from the image file in the primary partition to the image file in the secondary partition. If the image files in the primary and secondary partitions have the same version, the version does not change after this command is executed.

Example

# Roll back the iBMC software.

iBMC:/->ipmcset -d rollback
WARNING: The operation may have many adverse effects
Do you want to continue?[Y/N]:y
Set rollback successfully, system will reboot soon!
Download
Updated: 2019-08-01

Document ID: EDOC1000177670

Views: 149580

Downloads: 656

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next