Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a Logical Drive (deleteld)
Parameters
Parameter |
Description |
Value |
|---|---|---|
| control_id | Specifies the ID of the RAID controller. |
0 to 255 |
| ldid | Specifies the ID of a logical disk to be deleted. | 0 to 255 |
Usage Guidelines
This command can be used only when either of the following conditions is met:
- The RAID controller card supports iBMC out-of-band management. You can refer to the Technical Specifications section in the RAID controller card user guide to determine whether the RAID card supports the iBMC out-of-band management.
- The iBMA 2.0 has started on the OS.
