No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 13

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Network Device Information (ifconfig)

Checking Network Device Information (ifconfig)


The ifconfig command is used to check network device information.


See the syntax of the ifconfig command of Linux.


This command supports the following parameters:
  • lo
  • ethn (n indicates a network port number)
  • -a

This command can also be used without parameters.

Usage Guidelines



iBMC:/->ifconfig eth1                                                       
eth1      Link encap:Ethernet  HWaddr 00:18:82:11:03:21   
          inet6 addr: fe80::218:82ff:fe11:321/64 Scope:Link 
          UP BROADCAST DEBUG RUNNING  MTU:1500  Metric:1 
          RX packets:28 errors:0 dropped:0 overruns:0 frame:0 
          TX packets:37 errors:0 dropped:0 overruns:0 carrier:0 
          collisions:0 txqueuelen:1000  
          RX bytes:1832 (1.7 KiB)  TX bytes:2558 (2.4 KiB) 
Updated: 2019-08-01

Document ID: EDOC1000177670

Views: 149726

Downloads: 656

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next