No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 13

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an SOL Session (sol -d activate)

Creating an SOL Session (sol -d activate)

Function

The sol -d activate command is used to establish a Serial Over LAN (SOL) session to the system serial port or iBMC serial port of a server.

Format

ipmcset -t sol -d activate -v <option> <mode>

Parameters

Parameter

Description

Value

option

Serial port to be connected.

  • 1: system serial port
  • 2: iBMC serial port

mode

SOL session mode.

  • 0: shared mode

    The shared mode allows two SOL sessions to be established simultaneously. Each user can view the operations performed by the other user.

  • 1: private mode

    The private mode allows only one user to set up the SOL session.

Usage Guidelines

Only iBMC V256 and later versions support this command.

Before stabling an SOL session to the system serial port, configure the serial port redirection function on the OS. For details, see the operation guide provided by the OS vendor.

You can press Esc and then ( with an interval less than one second to exit from the SOL session to the command line interface.

Example

# Establish an SOL session in shared mode to the system serial port.

iBMC:/->ipmcset -t sol -d activate -v 1 0
[Connect SOL successfully! Use 'Esc(' to exit.]
Warning! The SOL session is in shared mode, the operation can be viewed on another terminal.

sles11sp1:~ # 
sles11sp1:~ # Esc( [Close SOL]

SOL connection closed.
Download
Updated: 2019-08-01

Document ID: EDOC1000177670

Views: 149525

Downloads: 656

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next