No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 14

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the Certificate Authentication Mode (syslog -d auth)

Querying and Setting the Certificate Authentication Mode (syslog -d auth)


The syslog -d auth is used to query and set the certificate authentication mode.


ipmcget -t syslog -d auth

ipmcset -t syslog -d auth -v <option>


Parameter Description Value
option Specifies the certificate authentication mode.
  • 1: one-way authentication
  • 2: mutual authentication

Usage Guidelines

  • One-way authentication: Only the syslog server certificate is authenticated.
  • Mutual authentication: Certificates of both the syslog server and the client are authenticated.


# Set the certificate authentication mode to mutual authentication.

iBMC:/->ipmcset -t syslog -d auth -v 2
Set syslog auth type successfully.

# Query the current certificate authentication mode.

iBMC:/-> ipmcget -t syslog -d auth
Syslog auth type: mutual authentication
Updated: 2019-11-19

Document ID: EDOC1000177670

Views: 170939

Downloads: 730

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next