No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 13

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the PSU Work Mode (psuworkmode)

Setting the PSU Work Mode (psuworkmode)

Function

The psuworkmode command is used to set the PSU work mode.

Format

ipmcset -d psuworkmode -v <option> [active_psuid]

Parameters

Parameter Description Value
option PSU work mode.
  • 0: load-balancing mode
  • 1: active/standby mode
active_psuid ID of the active PSU when the PSUs are working in active/standby mode. 1 or 2

Usage Guidelines

None

Example

# Set the PSU work mode.

iBMC:/->ipmcset -d psuworkmode -v 1 1
Set Power Work Mode (Active Standby) successfully
Download
Updated: 2019-08-01

Document ID: EDOC1000177670

Views: 148024

Downloads: 654

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next