No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 14

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the In-Band User Management Status (user -d usermgmtbyhost)

Querying and Setting the In-Band User Management Status (user -d usermgmtbyhost)


The user -d usermgmtbyhost command is used to enable or disable in-band user management or query the in-band user management settings.


ipmcset -t user -d usermgmtbyhost -v <option>

ipmcget -t user -d usermgmtbyhost






Status of in-band user management.

  • 0: disables in-band user management.
  • 1: enables in-band user management.

Usage Guidelines

If in-band user management is disabled, user management cannot be performed through the BIOS or by using the IPMI commands sent in in-band mode.


# Disable in-band user management.

iBMC:/->ipmcset -t user -d usermgmtbyhost -v 0
The BMC user management function is successfully disabled on the host side.

# Query the in-band user management settings.

iBMC:/->ipmcget -t user -d usermgmtbyhost
Updated: 2019-11-19

Document ID: EDOC1000177670

Views: 160054

Downloads: 685

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next