No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 13

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting Automatic Discovery Configuration (autodiscovery)

Querying and Setting Automatic Discovery Configuration (autodiscovery)


The autodiscovery command is used to query and set the automatic discovery function.


ipmcget -d autodiscovery

ipmcset -d autodiscovery -v <enable>/<disable> [option(0/1)] [netport]


Parameter Description Value
enabled/disable Enables or disables the automatic discovery function.
  • enable: Enables automatic discovery.
  • disable: Disables automatic discovery.
option Specifies a network segment.
  • 0: Broadcasts to
  • 1: Subnet broadcast address
netport Specifies the port number. 0 to 65535

Usage Guidelines



# Query configuration of the automatic discovery function.

iBMC:/->ipmcget -d autodiscovery
State         : disabled
Broadcast     :
NetPort       : 26957

# Enable the automatic discovery function.

iBMC:/->ipmcset -d autodiscovery -v enable 0 26957
Set state to (enable) successfully.
Set broadcast to ( successfully.
Set netport to (26957) successfully.
Updated: 2019-08-01

Document ID: EDOC1000177670

Views: 149547

Downloads: 656

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next