No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 14

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the SNMP Trap Version (trap -d version)

Querying and Setting the SNMP Trap Version (trap -d version)


The trap -d version command is used to query and set the SNMP trap version.


ipmcget -t trap -d version

ipmcset -t trap -d version -v <V1 | V2C | V3>


Parameter Description Value
V1 Indicates SNMPv1. -
V2C Indicates SNMPv2c. -
V3 Indicates SNMPv3. -

Usage Guidelines

The default value is V1. However, V3 is recommended. Exercise caution when using V1 and V2C, because they pose security risks.


# Set the SNMP trap version to SNMPv2c.

iBMC:/->ipmcset -t trap -d version -v V2C
Set trap V2C success.

# Query the SNMP trap version.

iBMC:/->ipmcget -t trap -d version
Trap version : V2C
Updated: 2019-11-19

Document ID: EDOC1000177670

Views: 169749

Downloads: 708

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next