No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 13

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the SNMPv3 Trap User (trap -d user)

Querying and Setting the SNMPv3 Trap User (trap -d user)


The trap -d user command is used to query and set the SNMPv3 trap user.


ipmcget -t trap -d user

ipmcset -t trap -d user -v <username>


Parameter Description Value

Indicates the SNMPv3 trap user.

It must be a user name that has been defined already.

Usage Guidelines

The same user name and password must be configured on the SNMP network management station (NMS).

By default, the trap V3 user name is root for V3 servers and Administrator for V5 servers.


# Set the SNMPv3 trap user to root.

iBMC:/->ipmcset -t trap -d user -v root
Set trap user root successfully.

# Query the SNMPv3 trap user.

iBMC:/->ipmcget -t trap -d user
Trap user : root
Updated: 2019-08-01

Document ID: EDOC1000177670

Views: 148538

Downloads: 656

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next