No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Rack Server iBMC (V260 to V278) User Guide 12

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying NTP Information (ntpinfo)

Querying NTP Information (ntpinfo)

Function

The ntpinfo command is used to query Network Time Protocol (NTP) information about the iBMC.

Format

ipmcget -d ntpinfo

Parameters

None

Usage Guidelines

None

Example

# Query iBMC NTP information.

iBMC:/->ipmcget -d ntpinfo
Status             : enabled
Mode               : dhcpv4
Preferred Server   : 192.168.2.26
Alternative Server : 192.168.2.77
Synchronize        : successful
Auth Enable        : disabled
Group Key          : not imported
Download
Updated: 2019-06-04

Document ID: EDOC1000177670

Views: 124718

Downloads: 586

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next