No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 13

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the SNMP Trap Port Number (trap -d port)

Setting the SNMP Trap Port Number (trap -d port)


The trap -d port command is used to set the SNMP trap port number of the iBMC.


ipmcset -t trap -d port -v <destination> <portvalue>


Parameter Description Value

Identifies an SNMP trap destination.

Value range: 1 to 4
portvalue Specifies the SNMP trap port number.

Value range: 1 to 65535

Default value: 162

Usage Guidelines



# Set the port number for SNMP trap destination 1 to 1024.

iBMC:/->ipmcset -t trap -d port -v 1 1024
Set trap dest1 port successfully.
Updated: 2019-08-01

Document ID: EDOC1000177670

Views: 148699

Downloads: 656

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next