Rate and give feedback
:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Server Reset Mode (frucontrol)
Parameters
| Parameter | Description | Value |
|---|---|---|
option |
Specifies the reset mode. |
|
Example
# Forcibly reset the server.
iBMC:/->ipmcset -d frucontrol -v 0
WARNING: The operation may have many adverse effects. Do you want to continue?[Y/N]:y FRU control fru0 (forced system reset) successfully.
# Forcibly power cycle the server.
iBMC:/->ipmcset -d frucontrol -v 2
WARNING: The operation may have many adverse effects. Do you want to continue?[Y/N]:y FRU control fru0 (forced power cycle) successfully.
Previous
