No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 13

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing the User Password (password)

Changing the User Password (password)

Function

The password command is used to change the user password.

Format

ipmcset [-t user] -d password -v username

Parameters

Parameter Description Value
username Specifies the user whose password needs to be changed. -

Usage Guidelines

Administrators can change the password of any user. Operators and common users can only change their own passwords. The password of the current user is required.

The password setting rules vary depending on whether password complexity check and weak password check are enabled. To check whether password complexity check is enabled, run the passwordcomplexity command. To check whether weak password check is enabled, run the weakpwddic command.

  • If password complexity check is disabled, the password cannot be empty or exceed 20 characters.
  • If password complexity check is enabled, the password must meet the following requirements:

    • Contain 8 to 20 characters
    • Contain at least a space or one of the following special characters:

      `~!@#$%^&*()-_=+\|[{}];:'",<.>/?

    • Contain at least two types of the following characters:

      • Uppercase letters A to Z
      • Lowercase letters a to z
      • Digits 0 to 9
    • Cannot be the same as the user name or the user name in reverse order.
    • Have at least two new characters when compared with the previous password.
  • If weak password check is enabled, the password cannot be the same as the passwords contained in the weak password dictionary. (You can run the ipmcset -t user -d weakpwddic -v export command to export the weak passwords from the weak password dictionary.)
    NOTE:
    • Weak password check is not supported by V3 servers.

    • The default password Admin@9000 of the V5 servers is in the weak password dictionary.

Example

# Change the password of user.

iBMC:/->ipmcset -d password -v user
Input your password:
New password:
Confirm password:
Set user password successfully.
Download
Updated: 2019-08-01

Document ID: EDOC1000177670

Views: 148383

Downloads: 656

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next