No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Rack Server iBMC (V260 to V278) User Guide 11

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Upgrading the Firmware (upgrade)

Upgrading the Firmware (upgrade)

Function

The upgrade command is used to upgrade the server firmware, which includes the iBMC, BIOS, SD card firmware, and complex programmable logic device (CPLD).

Format

ipmcset -d upgrade -v <filepath>

Parameters

Parameter Description Value
filepath

Specifies the absolute path of the upgrade file.

NOTE:
Only the xxx.hpm file is supported.
Example value: /tmp/image.hpm.

Usage Guidelines

If the iBMC of the RH5885H V3 server needs to be upgraded from V217 or earlier to V308 or later, upgrade the iBMC to a version between V221 and V276 and then upgrade it to the target version.

Before running this command, use a file transfer tool that supports SFTP, for example WinSCP, to transfer the upgrade file to the specified directory (for example /tmp) of the iBMC file system.

After the iBMC or SD card controller upgrade is complete, the iBMC restarts automatically for the upgrade to take effect.

  • In single-system mode, running the upgrade command on the primary iBMC will upgrade the primary iBMC and secondary iBMC simultaneously.
  • In dual-system mode, the upgrade command will upgrade only the iBMC on which the command is executed.

Example

# Upgrade the firmware.

iBMC:/->ipmcset -d upgrade -v /tmp/image.hpm
Please make sure the iBMC is working while upgrading!
Updating...
100%
Update successfully.
Download
Updated: 2019-02-28

Document ID: EDOC1000177670

Views: 108739

Downloads: 566

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next