No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Rack Server iBMC (V260 to V278) User Guide 12

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting iBMC IPv6 Address (ipaddr6)

Setting iBMC IPv6 Address (ipaddr6)

Function

The ipaddr6 command is used to set the IPv6 address, prefix length, and gateway address of the iBMC.

Format

ipmcset -d ipaddr6 -v <ipaddr6/prefixlen> [gateway6]

Parameters

Parameter Description Value
ipaddr6 Indicates the IPv6 address to be set for the iBMC.

An IP address that is 128 bits in length consisting of eight 16-bit fields: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx.

However, most IPv6 addresses do not occupy all 128 bits and can be abbreviated. In addition, the two-colon (::) notation can be used to represent contiguous 16-bit fields of zeros, and leading zeroes in a field can be omitted.

For example, the IPv6 address 2001:0db8:3c4d:0015:0000:0000:1a2f:1a2b can be abbreviated as 2001:db8:3c4d:15::1a2f:1a2b.

prefixlen Indicates the prefix length to be set for the iBMC. 0 to 128
gateway6 Indicates the IPv6 gateway address to be set for the iBMC.

An IP address that is 128 bits in length consisting of eight 16-bit fields: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx.

However, most IPv6 addresses do not occupy all 128 bits and can be abbreviated. In addition, the two-colon (::) notation can be used to represent contiguous 16-bit fields of zeros, and leading zeroes in a field can be omitted.

For example, the IPv6 address 2001:0db8:3c4d:0015:0000:0000:1a2f:1a20 can be abbreviated as 2001:db8:3c4d:15::1a2f:1a20.

Usage Guidelines

  • After an IPv6 address is changed, the new IP address takes effect immediately.

  • In addition to the IPv6 address, Link-Local Address can be used to access the iBMC. You can run the ipmcget command to obtain Link-Local Address.

Example

# Set the IPv6 address of the iBMC to 2011::6516, prefix length to 64, and IPv6 gateway to 2011:1.

iBMC:/->ipmcset -d ipaddr6 -v 2011::6516/64 2011:1
Set IPV6 address successfully.
Set IPV6 prefix successfully.
Set IPv6 GATEWAY6 successfully.

# Query the changed IP address of the iBMC management network interface.

iBMC:/->ipmcget -d ipinfo
EthGroup ID           :  1
Net Mode              :  Manual
Net Type              :  Dedicated
IPv4 Information      :
IP Mode               :  static
IP Address            :  192.168.0.25
Subnet Mask           :  255.255.0.0
Default Gateway       :  192.168.0.1
MAC Address           :  00:18:e1:c5:d8:66
IPv6 Information      :
IPv6 Mode             :  static
IPv6 Address          :  2011::6516
Default Gateway IPv6  :  2011::1
Link-Local Address    :  fe80::218:e1ff:fec5:d866/64
VLAN Information      :
VLAN State            :  disabled
VLAN ID               :  1
Download
Updated: 2019-06-04

Document ID: EDOC1000177670

Views: 121196

Downloads: 575

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next