No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 13

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the IPv4 Mode of the iBMC (ipmode)

Setting the IPv4 Mode of the iBMC (ipmode)

Function

The ipmode command is used to specify how the iBMC IPv4 address is allocated.

Format

ipmcset -d ipmode -v <dhcp | static>

Parameters

Parameter Description Value
dhcp The DHCP server dynamically allocates an IP address to the iBMC.
static The iBMC uses a static IP address.

Usage Guidelines

After the IPv4 mode is changed, the new configuration takes effect immediately.

Example

# Enable the iBMC to use an IPv4 address dynamically allocated by the DHCP server.

iBMC:/->ipmcset -d ipmode -v dhcp

# Query the iBMC IP address.

iBMC:/->ipmcget -d ipinfo
EthGroup ID           :  1
Net Mode              :  Manual
Net Type              :  Dedicated
IPv4 Information      :
IP Mode               :  dhcp
IP Address            :  192.168.0.12
Subnet Mask           :  255.255.0.0
Default Gateway       :  192.168.0.25
MAC Address           :  00:18:e1:c5:d8:66
IPv6 Information      :
IPv6 Mode             :  dhcp
IPv6 Address          :
Default Gateway IPv6  :
Link-Local Address    :  fe80::218:e1ff:fec5:d866/64
VLAN Information      :
VLAN State            :  disabled
VLAN ID               :  1
NOTE:

You can run the ipinfo command to view that the new IP address that the iBMC management network interface obtained from the DHCP server is 192.168.0.12.

Download
Updated: 2019-08-01

Document ID: EDOC1000177670

Views: 149589

Downloads: 656

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next