Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting SNMPv3 Authentication and Privacy Protocols (trap -d protocol)
Function
The trap -d protocol command is used to query and set the authentication and privacy protocols for SNMPv3 trap.
Parameters
Parameter | Description | Value |
---|---|---|
option | Specifies the authentication and privacy protocols for SNMPv3 trap. | Value:
Default value: 4 |
Usage Guidelines
The same authentication and privacy protocols must be configured on the SNMP server.
- The configured authentication and privacy protocols also apply to SNMPv3 at the same time.
- Using MD5 and DES may pose security risks. You are advised to use SHA and AES.
Example
# Set the SNMPv3 trap authentication and privacy protocols.
iBMC:/->ipmcset -t trap -d protocol -v 4
Set SNMP trap authentication and privacy protocol successfully.
# Query the SNMPv3 trap authentication and privacy protocols.
iBMC:/->ipmcget -t trap -d protocol
Trap protocol : Authentication : SHA Privacy : AES