No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 13

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the Available Network Port (ethport)

Querying the Available Network Port (ethport)


The ethport command is used to query the information of the available network port.


ipmcget -d ethport



Usage Guidelines



# Query the available network port.

iBMC:/->ipmcget -d ethport
Type       | Name       | Port ID  | Link Status
Dedicated  | eth2       | na       | Link_Up
LOM        | Port1      | 1        | Link_Down
LOM        | Port2      | 2        | Link_Down
LOM        | Port3      | 3        | Link_Down
LOM        | Port4      | 4        | Link_Down
Updated: 2019-08-01

Document ID: EDOC1000177670

Views: 148037

Downloads: 654

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next