No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 14

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the Server Power State (powerstate)

Querying and Setting the Server Power State (powerstate)


The powerstate command is used to query and set the power state of the server.


ipmcget [-t fru0] -d powerstate

ipmcset [-t fru0] -d powerstate -v <option>


Parameter Description Value
option Indicates the operation to be performed on the server.
  • 0: powers off the server safely
  • 1: powers on the server
  • 2: powers off the server forcibly

Usage Guidelines

The power-off command is invalid for a server in power-off state.


# Power on the server.

iBMC:/->ipmcset -d powerstate -v 1
WARNING: The operation may have many adverse effects
Do you want to continue?[Y/N]:y
Control fru0 power on successfully.

# Query the power state of the server.

iBMC:/->ipmcget -d powerstate
Power state   : On
Hotswap state : M4
Updated: 2019-11-19

Document ID: EDOC1000177670

Views: 169760

Downloads: 708

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next