No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro Rack Server iBMC (V260 to V278) User Guide 13

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Java Integrated Remote Console

Java Integrated Remote Console

Function Description

With the Java Integrated Remote Console, you can access and manage a server remotely, install or repair the OS, and install drivers on the server.

With the Integrated Remote Console:

  • You can use the keyboard and mouse of the local PC to remotely manage the server.
  • You can enable the server to remotely access the local PC over a network using a virtual floppy disk drive (FDD) or DVD-ROM drive. To the server, the use of the virtual FDD or virtual DVD-ROM drive is the same as the user of a physical USB device.
    NOTE:

    The media on the local PC can be a local FDD or DVD-ROM drive, or a floppy disk or DVD image file stored on the local PC or network drive.

Table 3-69 describes the icons on the KVM screen.

Table 3-69 Icons on the KVM screen

Icon

Description

Locks the toolbar.

Hides the toolbar.

Shows the server desktop in full-screen mode.

NOTE:

To switch from full-screen mode to windowed mode, move the pointer to the top of the full-screen or press Ctrl+Alt+Shift to display the tool bar and press .

Synchronizes the mouse location.

NOTE:

This button is available on the toolbar only when the server desktop is displayed in full screen mode.

Changes the mouse mode.

NOTE:

This button is available on the toolbar only when the server desktop is displayed in full screen mode.

Returns to the server desktop in windowed mode.

NOTE:

This button is available on the toolbar only when the server desktop is displayed in full screen mode.

Displays the power control menu, which includes the following:
  • Power On
  • Forced Power Off
  • Power Off
  • Forced System Reset
  • Forced Power Cycle

Records a video for the operations performed on the server.

Controls the server mouse. The control operations include the following:

  • Mouse Acceleration

    Accelerates the mouse on the server desktop to synchronize it with the mouse on the local PC.

    NOTE:

    The SUSE versions earlier than SUSE 12 do not support mouse acceleration.

  • Single Mouse

    Hides the mouse on the local PC and displays only the mouse on the server desktop.

  • Mouse & Key Reset

    Simulates the removal and installation of a USB keyboard and mouse. When the keyboard and mouse on the server desktop stop responding, you can click Mouse & Key Reset to restore them.

Default setting: Mouse Acceleration

NOTE:

If Mouse Acceleration and Single Mouse are not selected, the mouse of the server desktop and the mouse of the local PC will be displayed and are not synchronized.

Selects and uses a virtual DVD-ROM drive.

Selects and uses a virtual FDD.

Uses a DVD-ROM drive or FDD to create an image file.

Sends or customizes combination keys. The combination keys are described as follows:

  • Ctrl+Shift: switches between input methods.
  • Ctrl+Esc: expands or collapses the Start menu.
  • Ctrl+Alt+Del: locks the OS window, logs out a user, changes the password, opens Task Manager, or restarts the server.
  • Alt+Tab: switches between running applications.
  • Ctrl+Space: enables or disables an input method.
  • ResetKeyboad: simulates the release of a key on the keyboard.

Image Clarity

Adjusts the image clarity of the server desktop.

Indicates the status of the Num Lock key on the server.

Indicates the status of the Caps Lock key on the server.

Indicates the status of the Scroll Lock key on the server.

If you press Ctrl+S by mistake after entering the Linux character mode, the screen is locked. Press Scroll Lock to unlock the screen.

NOTE:

If a keyboard input error occurs when you manage the server using the Remote Virtual Console, check the status of the , , and icons first.

Displays help information.

Note: The icons on the Remote Virtual Console screen and their functions vary according to the server model.

Figure 3-36 shows the process for using a virtual DVD-ROM drive on the toolbar. The process for using an image file or virtual FDD is similar to this process.

Figure 3-36 Process

GUI

Choose Remote Console from the main menu, and click Java Integrated Remote Console (Shared) or Java Integrated Remote Console (private).

The KVM screen is displayed.

NOTE:

If you click Java Integrated Remote Console (Shared), two users are allowed to simultaneously access and perform operations on the server. Each user can view the operations performed by the other user, which causes security risks.

The KVM screen consists of three areas, as shown in Figure 3-37. Table 3-70 describes the areas.

Figure 3-37 KVM screen

Table 3-70 Areas on the KVM screen

No.

Area

Function

1

Toolbar

The icons on the toolbar can be used to remotely manage the server.

2

Server desktop

You can use the mouse and keyboard on your local PC to manage the server on a real-time basis.

3

Status bar

Displays tips for the server desktop and data about communication between the server and the local PC on a real-time basis.

Procedure

Sending a Combination Key

  1. On the KVM screen, click on the toolbar.

    The combination key dialog box is displayed.

  2. Click a combination key.

    The server performs the operation defined for the combination key.

NOTE:

If you want to customize a combination key, enter the keys in the text box next to Custom and click Send.

Mounting a DVD-ROM Drive

Mount the DVD-ROM drive on the local PC to the server.

  1. On the KVM screen, click on the toolbar.

    The dialog box shown in Figure 3-38 is displayed.

    Figure 3-38 Mounting a virtual DVD-ROM drive

  2. Select CD/DVD.
  3. Select the drive letter of the DVD-ROM drive on the local PC from the drop-down list, for example, G:.
  4. Click Connect.

    The DVD-ROM drive of the local PC is mounted to the server.

    NOTE:

    To dismount the DVD-ROM drive, click Disconnect. Then, click Yes in the Confirm dialog box displayed.

Loading an Image File from the Local PC Through the Virtual DVD-ROM Drive

Mount the DVD-ROM drive on the local PC and load an image file from the local PC to the server.

  1. On the KVM screen, click on the toolbar.

    The dialog box shown in Figure 3-38 is displayed.

  2. Select Image File.
  3. Click Browse.

    The Open dialog box is displayed.

  4. Select the image file on the local PC, and click Open.

    The dialog box shown in Figure 3-38 is displayed.

  5. Click Connect.

    The virtual DVD-ROM drive is successfully mounted to the server and the image file is successfully loaded.

    NOTE:
    • To load another image file, click Eject to eject the existing DVD image file, select the new DVD image file, and click Insert.

    • To dismount the virtual DVD-ROM drive, click Disconnect. Then, click Yes in the Confirm dialog box.

Mounting a Virtual FDD

Mount the FDD on the local PC to the server.

  1. On the KVM screen, click on the toolbar.

    The dialog box shown in Figure 3-39 is displayed.

    Figure 3-39 Mounting a virtual FDD

  2. Select Floppy.
  3. Select the drive letter of the FDD on the local PC from the drop-down list, for example, A:.
  4. Select the Write Protect check box.
    NOTE:

    Write Protect is a mechanism that prevents alteration or erasure of important data. If Write Protect is selected, data cannot be written to the specified FDD.

  5. Click Connect.

    The FDD is mounted to the server.

    NOTE:

    To dismount the FDD, click Disconnect. Then, click Yes in the Confirm dialog box.

Loading an Image File from the Local PC Through the Virtual FDD

Mount the FDD of the local PC and load an image file from the local PC to the server.

  1. On the KVM screen, click on the toolbar.

    The dialog box shown in Figure 3-39 is displayed.

  2. Select Image File.
  3. Click Browse.

    The Open dialog box is displayed.

  4. Select the image file on the local PC, and click Open.

    The dialog box shown in Figure 3-39 is displayed.

  5. Click Connect.

    The image file is successfully loaded to the server.

    NOTE:
    • To load another image file, click Eject to eject the existing virtual FDD, select the new image file, and click Insert.

    • To dismount the virtual FDD, click Disconnect. Then, click Yes in the Confirm dialog box.

Creating an Image File

Create an image file with the help of the floppy disk on the FDD or DVD-ROM on the DVD-ROM drive of the local PC. The created image file is stored on the local PC.

Before performing this operation, ensure that a floppy disk has been inserted into the FDD or a DVD-ROM has been inserted into the DVD-ROM drive of the local PC.

  1. On the KVM screen, click on the toolbar.

    The dialog box shown in Figure 3-40 is displayed.

    Figure 3-40 Creating an image file

  2. Select the drive letter of the FDD or DVD-ROM drive on the local PC from the Driver drop-down list.
  3. Click Browse. The Save dialog box is displayed.
  4. Specify a directory for saving the image file, and enter the file name in the File Name text box.
    NOTE:

    You can create only *.iso image files using the DVD-ROM drive and *.img image files using the FDD.

  5. Click Save.

    The dialog box shown in Figure 3-40 is displayed.

  6. Click Make.

    Progress indicates the progress of the image file creation.

    NOTE:

    To stop creating an image file, click Stop.

Mounting a Virtual Directory

Mount the directories on the local PC to the server so that the server can access the local directories in read-only mode.

Before mounting a directory, copy the required files to the directory. After the directory is mounted, you cannot add files to the directory or delete files from it.

  1. On the KVM screen, click from the toolbar.

    The dialog box shown in Figure 3-41 is displayed.

    Figure 3-41 Mounting a virtual directory

  2. Click the Directory option button.
  3. Click Browse.

    The dialog box for selecting a local directory is displayed.

  4. Select the directory and click Open.
  5. Click Connect.
    NOTE:
    • If the connection is successful, the virtual directory is displayed in the server OS list. You can copy files from this directory.
    • To dismount the virtual directory, click Disconnect.

Powering On the Server

  1. On the KVM screen, click on the toolbar, and choose Power On from the menu.

    The Confirm dialog box is displayed.

  2. Click Yes.

    The server is powered on.

    NOTE:

    The server power-on time varies depending on the server configuration.

Powering Off the Server

  • Before powering off the server, ensure that all services are stopped.

  • Select a power-off mode based on your requirements. For details about the difference between the power-off modes, see Power Control in the iBMC User Guide.
  1. On the KVM screen, click on the toolbar, and choose Power Off from the menu.

    The Confirm dialog box is displayed.

  2. Click Yes.

    The server is powered off.

Forcibly Resetting or Power Cycling the Server

  • A forced reset or power cycle may damage user programs or unsaved data.

  • Before forcefully resetting the system or forcefully power cycling the server, ensure that no service risk exists.

  • Select a reset mode (Forced System Reset or Forced Power Cycle) based on service requirements. For details about the difference between the two modes, see Power Control in the iBMC User Guide.

  1. On the KVM screen, click on the toolbar, and choose Forced System Reset or Forced Power Cycle from the menu.

    The Confirm dialog box is displayed.

  2. Click Yes.

    The server starts to reset or powers off and then powers on.

    NOTE:

    The reset or power cycle duration varies depending on the server configuration.

Resetting the Keyboard and Mouse

Simulate the removal and installation of a USB keyboard and mouse when the keyboard and mouse on the server desktop stop responding.

  1. On the KVM screen, click on the toolbar, and choose Mouse & Key Reset from the menu.

    The Confirm dialog box is displayed.

  2. Click Yes.

    The USB keyboard and mouse are reset.

Recording a Video of the Server Desktop

Record a video of the desktop displayed on the Remote Virtual Console.

  1. On the KVM screen, click on the toolbar.

    The Confirm dialog box is displayed.

  2. Click Yes.

    The Save dialog box is displayed.

  3. Select a directory for saving the video file to be recorded, and enter a file name in the File Name text box.
  4. Click Save.

    The KVM screen is displayed, and the video recording starts.

  5. After the video is recorded, click .

    The Confirm dialog box is displayed.

  6. Click Yes.

    The video file is saved to the specified directory.

    The video file is a .rep file. You can play the video file on the Play Back page.

Using a Single Mouse

If the mouse on the local PC is not synchronized with the server desktop, use the single-mouse function to hide the mouse on the local PC and display only the mouse of the server desktop on the

  1. On the KVM screen, click on the toolbar, and choose Single Mouse from the menu.

    The Confirm dialog box is displayed.

  2. Click Yes.

    Only the mouse on the server desktop is displayed on the KVM screen.

Accelerating the Remote Mouse

Accelerate the mouse on the server desktop to synchronize it with the mouse on the local PC.

  1. On the KVM screen, click on the toolbar, and choose Mouse Acceleration from the menu.

    The Confirm dialog box is displayed.

  2. Click Yes.

    The server mouse is synchronized with the mouse on the local PC.

Download
Updated: 2019-08-01

Document ID: EDOC1000177670

Views: 154577

Downloads: 664

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next