No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Virtualization

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R009

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the virtualization feature supported by the device.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Obtain and Install the QEMU Tool?

How Do I Obtain and Install the QEMU Tool?

The installation and running environment requirements of the QEMU tool are as follows:
  • Linux: Ubuntu 12.04.5 64-bit system
  • The PC running the Linux operating system must connect to the Internet.

The procedure for obtaining and installing the QEMU tool is as follows:

  1. Run the sudo apt-get install qemu command to obtain and install the QEMU tool.
  2. Run the sudo qemu-system-x86_64 --version command to check whether the QEMU tool is successfully installed.
    If the following command output is displayed, the QEMU tool has been successfully installed.
    QEMU emulator version 1.0(qemu-kvm-1.0), Copyrigh ( c ) 2003-2008 Fabrice Bellard
Updated: 2019-05-06

Document ID: EDOC1000177806

Views: 8988

Downloads: 38

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next