No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Virtualization

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R009

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the virtualization feature supported by the device.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring VNC for VM Login

Configuring VNC for VM Login

Context

The virtual environment provides the Virtual Network Computing (VNC) service that allows the VNC viewer (controlling end) to control the VNC server (controlled end). You can use the VNC viewer to control the VNC server, run applications on the VNC server, and use system resources of the VNC server.

You can log in to a VM (controlled end) from the VNC viewer using the IP address of a virtual interface and the VNC service port number, and install the operating system (OS) and applications on the VM in the GuestOS graphical user interface (GUI).

NOTE:

To ensure secure login using VNC, you are advised to establish an IPSec tunnel on the VNC client to encrypt data.

Pre-configuration Tasks

  • Downloading a VNC viewer in corresponding version to the server and install the VNC viewer

    Currently, the supported VNC viewers include VNC Viewer 5.2.2 and UltraVNC Viewer 1.1.9.0. You can download a VNC viewer at http://www.realvnc.com/.

  • Ensuring that the server and device have reachable routes to each other

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run virtual-environment ip-address

    Enter the virtual-environment view.

    The parameter ip-address indicates the IP address of the virtual interface br0.

  3. Run vm vm-name

    The VM view is displayed.

  4. Run vnc-server port port-num password cipher

    The VNC service port number and authentication password are configured.

  5. Run vm activate

    The VM is activated.

    By default, a VM is deactivated.

    Resources allocated to a VM by the system take effect only after the VM is activated.

  6. Run vm start

    The VM is started.

    By default, a VM is not started.

Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000177806

Views: 8958

Downloads: 38

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next