No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Virtualization

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R009

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the virtualization feature supported by the device.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deactivating a VM

Deactivating a VM

Context

Deactivating a VM releases resources occupied by the VM. To reallocate resources to the VM, run the vm activate command to activate the VM.

Pre-configuration Tasks

Running the vm stop command to stop the VM

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run virtual-environment ip-address

    Enter the virtual-environment view.

    The parameter ip-address indicates the IP address of the virtual interface br0.

  3. Run vm vm-name

    The VM view is displayed.

  4. Run vm deactivate

    The VM is deactivated.

Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000177806

Views: 8818

Downloads: 38

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next